Kuppersberg TS 69 W - Инструкция по эксплуатации - Страница 19

19

english

Technical passporT

gas hob

Warning

Â

Do not leave the equipment 

unattended since the heat of burners is 
very high, and make sure that it will not 
be operated by children. 

Â

Pay attention for combustion risk 

in the event of cooking with vegetable 
oil and fats. 

Â

Do not approach the hob with 

combustible and explosives. 

8.  M A I N T E N A N C E  A N D 

C L E A N I N G 

Please comply with the following 

rules before cleaning and maintenance. 

Â

Close the unit for safety purposes. 

If your device is set to natural gas 
setting close the valve. For LPG hobs 
close hood. 

Â

Take out the plug of your unit 

from wall socket. 

Â

If the hob is hot wait until it will 

be cooled. 

Â

In order that you use the glass 

hob and grills for longer periods you 
need to clean them with appropriate 
cleaning agents at certain intervals. 

Â

Cleaning on stainless surfaces 

should be conducted in accordance 
with the steel surfaces, and the surface 
should be dried preferably with a soft 
leather part. 

Â

In order to avoid any damage to 

the burning system do not use burning 
system when the burners are not 
installed. 

Â

After the thermo-coupled 

cleaning providing plug and safety 

system, clean it to place burners in 
suitable manner. 

Â

Wash the upper burning heads at 

certain intervals with water and clean 
and dry the gas channels with brush. 
Pay attention to install the burning 
heads on their places. 

Â

When you clean the burner do 

not use acid, thinner, benzene or similar 
chemical. 

Â

You need to clean your glass hob 

and its grills with suitable cleaning 
agents in order to use it for longer 
period. 

Â

It should be cleaned with suitable 

cleaners for stains and oil. 

Â

Harsh cleaning agents, stain 

removers and detergents, wire wool and 
sponge should not be used. 

Â

Do not allow heating of the pans 

as empty since the heat accumulated 
at the bottom may damage the glass 
surface. 

Â

No cold liquid should be poured 

on the glass surface or the burners 
when they are hot. The glass may crack 
due to thermal shock. 

Clean the hob regularly after waiting 

for cooling after each use in order to 
keep your hob at the best manner. 

Do not take out the control switches 

in any manner during cleaning. 

Enamel Parts 

All enamel parts are used by using 

water with soap and suitable detergents. 
The hob should be dried thoroughly 
after the process.