Elica NIKOLATESLA HP BL/F/ 83 - Инструкция по эксплуатации - Страница 64

64 

USING THE EXTRACTOR FAN 
 

 Power-on 

Press (touch) 

ON/OFF hob/ extractor

The indicator light will turn on to indicate that the hob/extractor 
is ready for use 
Press again to turn off 

Note: This function has priority over the others. 
 
 

 Switching on the extractor fan: 

Touch (press) the 

Selection bar (6)

 to activate the extractor 

fan   

 Extraction speed (power): 

Touch and scroll along the 

Selection bar (6):

 
to the right to increase the speed (power) of the extractor fan 
(0-10); 
 
to the left to decrease the speed (power) of the extractor fan 
(10-0); 

 Timer  

Activation/Regulation of Timer function for the 
extractor fan 

• Select the extractor fan (speed 

¹ 

0). 

• Press 

(8) 

to access the Timer function (from 

any speed) 
 
• Regulate the duration of the Timer: 

press the selector 

, to increase the automatic shut-

down time 
press the selector 

 , to decrease the automatic 

shut-down time 

the display 

(15)

 will show the countdown, 

 
Note: 

on the side of the display of the extractor fan, with the 

Timer in use, the following symbol will appear 

(19) 

When the timer has finished the countdown, there is an 
acoustic signal (for 2 minutes, or it will stop when one of the 
buttons on the hob is pressed), while the display 

(15)

 will 

flash, with the symbol “

.

". 

To switch off the Timer:   

• select the cooking zone 
• set the value of the timer to " " , by means of 

Not:

 the function remains active if no other key is pressed 

in the meantime. 

 Filter saturation indicator (Grease filter) 

The hood indicates when filter maintenance is needed: 
 
the 

“

”

(

17

) LED lights up  

 Reset filter saturation (Grease filter) 

After carrying out maintenance on the filters  hold down the 

 key;  

the 

“

” 

LED turns off and the count restarts. 

 Automatic mode  

The hood will turn on at the most suitable speed, adapting the 
extraction capacity to the maximum cooking level used in the 
cooking zone. 
Once the hob is turned off, the hood adapts its aspiration 
speed, gradually decreasing it, so as to eliminate residual 
vapours and odours 
 
To activate this function: 

Briefly press 

(7)

, the LED "

" 

(18)

 will light up to 

indicate that the hood is working in this mode. 
 

Automatic hood mode with SNAP® 

For information on how to make the connection between the 
hood and SNAP®, see the manual supplied with 

SNAP® 

or 

visit www.elica.com. 

Note:

SNAP®

 is an auxiliary extraction unit able to operate at 

the same time as the hood. 
 
To activate this function: 

Briefly press 

(7) 

, the LED "

" 

(18)

 and the LED 

“SNAP”

 (21)

 will light up to indicate that the hood is working in 

this mode.