Candy CH 642 X - Инструкция по эксплуатации - Страница 9

09 GB- IE

 . STOPPING A COOKING ZONE

-

Press the selection button of the required cooking zone.

- Press the "-" button to display heat level     . Now the zone goes 

off, the indicator     goes off after 10 seconds.

- To stop rapidly, press simultaneously the "-" and the 

respective cooking zone selection. 

The heat level automatically goes down to     . The cooking 

zone goes off.

 . GENERAL STOP

The cooking zones and the timer can be stopped 
at any moment by pressing the On-Off button.

 . RESIDUAL HEAT INDICATOR

The control panel tells the user when the surface temperature of 
the cooking zones exceeds about 60°C, by the following 
displaying:     . When the temperature goes back below 60°C, the      
display goes off.

For ending the cooking, we advise switching off the cooking zone 
and using the residual heat of the zone to finish cooking gently.

N.B. After a cut in the current, the residual heat indicator 
disappears completely, even if the surface temperature exceeds 
60°C.

 . OPERATING THE ADDITIONAL COOKING ZONE 
  (TWO ZONES)

The cooking zone with two zones is
fitted certain models        .............................

>

It is active in totality when the cooking zone is in function ; the 
control led of the additional cooking is displayed.

To desactivate the additional cooking zone :

-

Press again on the additional cooking zone touch. The Led goes 

off when it is desactivated.

To re-activate the additional cooking zone :

-

Press on the cooking zone button. The Led is active again.

 .  PROGRAMMING A COOKING ZONE (according to the model)

Every cooking zone can be programmed for a maximum time of 
99 minutes.
-

Start the required zone by following the previous instructions.

- Press on simultaneously the touch "-" and "+" to activate the 

timer, "      " is displayed.

-

Press again on the "+" button to select a time in minutes 

between 0 and 99 minutes or press on the "-" button to decrease 

the time between 30 minutes and 0. The timer control led near   

the level is displayed.

-->  the programmed time can be modified at any moment.

When the time is run, the cooking zone goes off automatically and 
an audible beep sounds for 1 minute, press a button to stop it.

-->  If any zone is activated, the timer can be used alone, as 
reminder, it will ring at the end of the programmed time.

Exam ple

LED

TY PE

B

LED

TY PE

B

7

7

 . LOCKING BUTTON OPERATION

The locking function prevents the children from starting the hob.
It is also used for cleaning the hob.

To lock the hob :

-

Press the on/off button       .

4 zones

        3 zones

. The hob is locked, the locking indicator " 

L

 " is displayed on all 

zones for 20 seconds.

If a cooking zone is at stage "hot",

 " 

L

 " 

and

 " 

H

 " 

appear alternately.

To unlock the hob :

. 

For the hob with 4 zones

, to unlock follow the same 

procedure.
. 

For the hob with 3 zones

, follow the same procedure but in 

the last stage you must to press the "-" touch instead the "+" 
touch.

The indication " 

L

 " disappears. The hob is unlocked and 

returns on stand-by mode.

2 sec

  LOCKING BUTTON OPERATION / FOR MODEL CH64

The locking function prevents the children from starting the hob.
It is also used for cleaning the hob.

To lock the hob :

-

Press the on/off button and then:   

. The hob is locked, the locking 
indicator " 

L

 " is displayed on all 

zones for 20 seconds. 

If a cooking zone is at stage "hot",

 " 

L

 " 

and

 " 

H

 " 

appear alternately.

To unlock the hob :

. 

For the hob

, follow the same 

procedure but in the last stage 
you must to press the "-" touch 
instead the "+" touch.

The indication " 

L

 " disappears. 

The hob is unlocked and returns 
on stand-by mode.