Zelmer ZIR3000 Stiro - Инструкция по эксплуатации - Страница 14

14

PRODUCT DISPOSAL

EN

This product  complies with European Directive  2012/19/EU  on electrical and electronic 
devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal 
framework applicable in the European Union for the disposal and reuse of waste electronic 
and electrical devices. Do not dispose of this product in the bin, instead going to the electri- cal 
and electronic waste collection centre closest to your home.
We hope that you will be satisfied with this product.

TROUBLESHOOTING 

Connection problem

Not enough water in tank

Not enough water in tank

Steam jet function was used 

very frequently within a short 

period.

Check main power supply cable, 

plug and outlet.

Temperature control is in MIN 

position

Select adequate temperature

Fill water tank

Fill water tank (see “getting 

started”, no 2).

Steam control is selected in 

non- steam position.

Set steam control between 

positions of minimum steam 

and maximum steam (see“iron 

chart”).

Put iron on horizontal position 

and wait before using steam jet 

function.

Selected temperature is lower 

than that specified to use with 

steam.

Select a higher temperature

Iron is not hot enough

Adjust to higher temperature to 

steam ironing. Put iron in 

vertical position and wait 

temperature indicator light 

turns off.

PROBLEM

POSSIBLE CAUSE

SOLUTION

STEAM JET AND VERTICAL 

STEAM JET FUNCTION 

DOES NOT WORK

Steam jet function was used 

very frequently within a short 

period.

Put iron on horizontal position 

and wait before using steam jet 

function.

STEAM JET AND VERTICAL 

STEAM JET FUNCTION 

DOES NOT WORK

SOLEPLATE IS NOT 

HEATING EVEN THOUGH 

IRON IS TURNED ON.

IRON DOES NOT PRODUCE 

STEAM

SPRAY FUNCTION DOES 

NOT WORK

C

M

Y

CM

MY

CY

CMY

K

AF-MANUAL_Plancha-ZELMER ZIR3000 stiro.pdf   14   12/4/21   11:38