Philips GC4890/02 - Инструкция по эксплуатации - Страница 13

Vertical steam boost

 1 

 You can also use the steam boost function when you hold the iron in 

vertical position.

This is useful for removing creases from hanging clothes, cur tains etc.

Never direct the steam at people.

Drip stop

This iron is equipped with a drip-stop function: the iron automatically stops 

producing steam when the temperature is too low, to prevent water from 

dripping out of the soleplate. When this happens, you may hear a sound. 

Automatic shut-off function (specific types only)

The automatic shut-off function automatically switches off the iron if it has 

not been moved for a while.

,

The red auto-off light flashes to indicate that the iron has been 

switched off by the automatic shut-off function.

To let the iron heat up again:

 1 

 Pick up the iron or move it slightly.

,

The red auto-off light goes out.

,

If the temperature of the soleplate has dropped below the set 

ironing temperature, the amber temperature light goes on.

 2 

 If the amber temperature light goes on after you have moved the 

iron, wait for it to go out before you start ironing.

Note: If the amber temperature light does not go on after you move the iron, 

the soleplate still has the right temperature and the iron is ready for use. 

Cleaning and maintenance

Cleaning

 1 

 Set the steam control to position 0, remove the plug from the wall 

socket and let the iron cool down. 

 2 

 Wipe flakes and any other deposits off the soleplate with a damp 

cloth and a non-abrasive (liquid) cleaning agent.

To keep the soleplate smooth, avoid hard contact with metal objects. 

Never use a scouring pad, vinegar or other chemicals to clean the 

soleplate.

 3 

 Clean the upper part of the iron with a damp cloth.

 4 

 Regularly rinse the water tank with water. Empty the water tank 

after you have rinsed it.

ENGLISH

13