Philips GC4890/02 - Инструкция по эксплуатации - Страница 17

Problem

Possible cause

Solution

Water droplets drip 

onto the fabric during 

ironing.

You have not closed the cap 

of the filling opening properly.

Press the cap until you hear a click.

You have put an additive in 

the water tank.

Rinse the water tank and do not put any 

additive in the water tank.

The set temperature is too 

low for steam ironing.

Set a temperature of or  

2

 higher.

You have used the steam 

boost function at a 

temperature setting  

below 

3

.

Set the temperature dial to a setting between 

3

 and MAX.

Water drips from the 

soleplate after the 

iron has cooled down 

or has been stored.

You have put the iron in 

horizontal position with 

water still left in the water 

tank.

Empty the water tank.

Flakes and impurities 

come out of the 

soleplate during 

ironing.

Hard water forms flakes 

inside the soleplate.

Use the Calc-Clean function one or more 

times (see chapter ‘Cleaning and maintenance’, 

section ‘Using the Calc-Clean function’).

The red light flashes 

(specific types only).

The automatic shut-off 

function has switched off the 

iron (see chapter ‘Features’, 

section ‘Automatic shut-off 

function’).

Move the iron slightly to deactivate the 

automatic shut-off function. The red auto-off 

light goes out.

The iron makes a 

humming sound.

The Ionic DeepSteam 

function is on.

If you hear the humming sound when you iron 

without steam, press the Ionic DeepSteam 

button to switch off the Ionic DeepSteam 

function. The Ionic DeepSteam function has no 

effect when you iron without steam.

The humming sound 

stops, although the 

Ionic DeepSteam 

function is on.

The sound stopped because 

you placed the iron on its 

heel.

The humming sound resumes as soon as you 

continue to iron.

ENGLISH

17