Philips Azur Advanced GC4930/10 - Инструкция по эксплуатации - Страница 6

ENGLISH

10

Problem

Possible cause

Solution

The iron is not hot enough yet 
to product steam.

Wait until the ‘iron ready’ light has 
stopped breathing and lights up steadily.

Water droplets drips 
onto the garment 
during ironing.

You have used the steam 
boost function too often 
within a short period. 

Continue ironing in horizontal position 
and wait a while before you use the 
steam boost function again. 

You have not closed the water 
tank lid properly.

Press the lid until you hear a ‘click’.

You have not insert the 
Quick Calc Release collector 
properly back to the appliance 
(specific types only).

Stop ironing and let the iron cools down 
for at least 1 hour. Take out the Quick 
Calc Release collector. Insert it back into 
the appliance and ensure the collector is 
in-line with the surface of the appliance. 
Push down the lever (“click”). 
If the Quick Calc Release collector is 
damaged, contact a consumer care 
center in your country (see the world wide 
guarantee leaflet for contact details).  

The iron does not 
produce a steam 
boost.

You have used the steam 
boost function too often 
within a short period. 

Continue ironing in horizontal position 
and wait a while before you use the 
steam boost function again.

The iron is not hot enough for 
ironing yet.

Wait until the ‘iron ready’ light has 
stopped breathing and lights up steadily. 

You have put a chemical into 
the water tank.

Rinse the water tank and do not put any 
perfume or chemicals into the water tank.

Dirty water and 
impurities come 
out of the soleplate 
during ironing. 

Hard water with impurities or 
chemicals has formed flakes 
inside the soleplate.

Perform Quick Calc Release (specific 
types only) or Calc-Clean (specific types 
only).
See chapter “Cleaning and maintenance”.

Water drips from 
the soleplate after 
the iron has been 
unplugged.

You have put the iron in 
horizontal position with water 
still left in the water tank.

Empty the water tank after use, or store 
the iron in vertical position. 

The steam slider is set to 

.

Set the steam slider to 

.

There is an amber 
light flashing on the 
handle of the iron.

The Calc-Clean reminder light 
is activated. This is to remind 
you to perform calc clean. 

Perform Quick Calc Release (specific 
types only) or Calc-Clean (specific 
types only). See chapter “Cleaning and 
maintenance”.

The iron leaves a 
shine or an imprint on 
the garment.

The surface to be ironed was 
uneven, for instance because 
you ironed over a seam or a 
fold in the garment.

The iron is safe to use on all ironable 
garments. The shine or imprint is not 
permanent and disappears when you 
wash the garment. Avoid ironing over 
seams or folds. You can also place a 
cotton cloth over the area to be ironed to 
avoid imprints.