Yamaha RX-V665 - Инструкция по эксплуатации - Страница 30

28

 En

Enjoy the sound field programs

In straight decoding mode, sounds are reproduced without 
sound field effect. 2-channel stereo sources are output 
from only the front left and right speakers. Multi-channel 
input sources are decoded straight into the appropriate 
channels and multi-channel sounds are reproduced 
without a sound field effect.

1

To enable straight decoding mode, press 

M

STRAIGHT

 (or 

k

STRAIGHT

).

“Straight” appears on the front panel display.

2

To cancel straight decoding mode, press 

M

STRAIGHT

 (or 

k

STRAIGHT

) again.

A sound field program name appears on the front 
panel display, and sound is reproduced with that 
sound field effect.

Virtual CINEMA DSP allows you to enjoy DSP sound 
field surround effects even without any surround speakers 
by using virtual surround speakers. You can even enjoy 
Virtual CINEMA DSP using a minimal two-speaker 
system that does not include a center speaker. 
When “Sur. L/R SP” in the setup menu is set to “None” 
(see page 45), this unit operates in Virtual CINEMA DSP 
mode.

Note

•

Virtual CINEMA DSP is not available in the following conditions even if 
you set “Sur. L/R SP” to “None” (see page 45).

–

headphone plug is connected to the PHONES jack.

–

7ch Stereo of the field sound program is selected.

–

Pure Direct mode or straight decoding mode is used.

SILENT CINEMA allows you to enjoy multi-channel 
sources with your headphones. SILENT CINEMA mode 
is automatically selected when you connect the headphone 
plug to the PHONES jack.

Note

•

SILENT CINEMA mode is not available in the following conditions.

–

2ch Stereo of the sound field program is selected.

–

Pure Direct mode or straight decoding mode is selected.

CINEMA DSP 3D mode creates the intensive and 
accurate stereoscopic sound field in the listening room.
To use this unit in CINEMA DSP 3D mode, presence 
speakers are required. Connect the presence speakers to 
the EXTRA SP jacks, perform the following settings and 
select a CINEMA DSP related sound field program.

•

Set the “Extra SP Assign” to “Presence” (see page 44).

•

Enables the CINEMA DSP 3D in the setup menu (see 
page 40).

•

Disconnect the headphones from the PHONES jack.

When the sound field program runs in CINEMA DSP 3D 
mode, the 3D indicator on the front panel lights up.

Enjoying unprocessed input sources 
(Straight decoding mode)

Enjoying sound field programs without 
surround speakers (Virtual CINEMA 
DSP)

Enjoy sound field programs with 
headphones (SILENT CINEMA™)

Using CINEMA DSP 3D mode