Husqvarna 325R 9679084-02 - Инструкция по эксплуатации - Страница 9

Contents

Introduction................................................................... 9

Safety........................................................................... 10

Assembly..................................................................... 14

Operation..................................................................... 15

Maintenance................................................................ 17

Troubleshooting......................................................... 19

Transportation, storage and disposal...................... 19

Technical data............................................................. 20

Accessories.................................................................21

EC Declaration of Conformity....................................22

Introduction

Operator's manual

The initial language of this operator's manual is English.

Operator's manuals in other languages are translations

from English.

Intended use

Use the product with a grass blade or a trimmer head to

cut different types of vegetation.

Note: National regulations can set limit to the operation

of the product.

Product overview

(Fig. 1)
1. Trimmer head
2. Grease filler cap
3. Bevel gear
4. Cutting attachment guard
5. Shaft
6. Stop switch
7. Throttle trigger
8. Throttle trigger lockout
9. Handlebar
10. Harness clamp
11. Starter housing
12. Spark plug cap, spark plug
13. Starter rope handle
14. Fuel tank
15. Air filter cover
16. Air purge bulb
17. Choke control
18. Handle adjustment
19. Throttle wire
20. Fast idle button
21. Harness
22. Combination wrench
23. Operator's manual
24. Transport guard
25. Blade
26. Support cup
27. Support flange
28. Locknut

29. Drive disc
30. Locking pin
31. Hex key

Symbols on the product

(Fig. 2)

WARNING! This product is dangerous.

Injury or death can occur to the operator or

bystanders if the product is not used

carefully and correctly. To prevent injury to

the operator or bystanders, read and obey

all safety instructions in the operator's

manual.

(Fig. 3)

Please read the operator's manual carefully

and make sure that you understand the

instructions before use.

(Fig. 4)

Use a protective helmet in locations where

objects can fall on you. Use approved

hearing protection. Use approved eye

protection.

(Fig. 5)

Use approved protective gloves.

(Fig. 6)

Use heavy-duty slip-resistant boots.

(Fig. 7)

The arrows show the limits for the position of

the handle.

(Fig. 8)

The product can cause objects to eject,

which can cause injury.

(Fig. 9)

Maximum speed of the output shaft.

881 - 001 - 10.10.2018

9