Husqvarna 325R 9679084-02 - Инструкция по эксплуатации - Страница 19

CAUTION: If you tighten the locknut too

much, it can cause damage to the

threads.

To sharpen the grass knife and

grass blade

WARNING: Stop the engine. Use protective

gloves.

• To sharpen the grass knife or grass blade correctly,

refer to the instructions that come with the cutting

attachment.

• Sharpen all edges equally to keep the balance.
• Use a single-cut flat file. (Fig. 59)

WARNING: Always discard a blade that is

damaged. Do not try to make a bent or

twisted blade straight and use it again.

Troubleshooting

The engine does not start

Check

Possible cause

Procedure

Stop switch.

The stop switch is in the stop position.

Set the stop switch to the start position.

Starter pawls.

The starter pawls cannot move freely.

Remove the starter cover and clean around

the starter pawls.

Let an approved service agent help you.

Fuel tank.

Incorrect fuel type.

Drain the fuel tank and fill with correct fuel.

Spark plug.

The spark plug is dirty or wet.

Make sure that the spark plug is dry and

clean.

The spark plug electrode gap is incorrect.

Clean the spark plug. Make sure that the

electrode gap is correct. Make sure that the

spark plug has a supressor.

Refer to technical data for correct electrode

gap.

The spark plug is loose.

Tighten the spark plug.

The engine starts but stops again

Check

Possible cause

Procedure

Fuel tank

Incorrect fuel type.

Empty the fuel tank and fill it with cor-

rect fuel.

Air filter

The air filter is clogged.

Clean the air filter.

Transportation, storage and disposal

Transportation and storage

• Let the product cool before transportation or storage.

• Remove the spark plug cap before long-term

storage.

• Attach the product during transportation. Make sure

that it cannot move.

881 - 001 - 10.10.2018

19