Husqvarna 325R 9679084-02 - Инструкция по эксплуатации - Страница 13

• Do not touch the engine or the muffler when then

engine is on. Do not touch the engine or the muffler

for a while after the engine stops. Hot surfaces can

cause injuries.

• A hot muffler can cause a fire. Be careful, if you use

the product near flammable liquids or fumes.

• Do not touch the parts in the muffler, if the muffler is

damaged. The parts can contain some carcinogenic

chemicals.

Locknut
The locknut is used to lock some types of cutting

attachment.
(Fig. 23)
When you install the locknut, tighten it in the opposite

direction to operation direction of the cutting attachment.

Harness release function

WARNING: Do not use the harness if the

release function is defective. Make sure that

the harness release function operates

correctly when you adjust the product.

The harness release function is at the front of the

product. The harness straps must always stay at the

correct position.

(Fig. 24)

In an emergency, the harness release function helps

you to safely release from the product.

Cutting attachment

WARNING: Read the warning instructions

that follow before you use the product.

• Do the regular maintenance. Let an approved

service center regularly examine the cutting

attachment to do adjustments or repairs.
• The performance of the cutting attachment

increases.

• The life of the cutting attachment increases.
• The risk of accidents decreases.

• Only use an approved cutting attachment guard. For

more information, see 

Accessories on page 21.

• Do not use a damaged cutting attachment.

Grass blades and grass cutters
• Use the product with an approved grass blade. Do

not use a grass blade without proper installation of

all required parts. Make sure that the installation is

done correctly and that the proper parts are used.

Inproper installation may cause the blade to fly off

and seriously injure the operator or the bystanders.

• Wear protective gloves when you handle or do

maintenance on the blade.

• Use head protection when you operate a product

with a grass blade.

• Grass blades and grass cutters are used to cut

rough grass.

• A grass blade can cause injury while it continues to

spin after the engine is stopped or the throttle trigger

is released. Make sure that the grass blade has

completely stopped rotating before any

maintenance.

• Stop the engine before you do work on the cutting

attachment. Make sure the cutting attachment fully

stops. Disconnect the lead from the spark plug.

• Only use an approved cutting attachment or a

correctly sharpened blade.

• Keep the teeth of the blade correctly sharpened.

(Fig. 25)
• Do not use a damaged cutting attachment.
• Attach the transport guard to the grass blade when

you transport or store the product.

Blade thrust
• A blade thrust is a sudden movement of the product

to the side, forward or rearward. A blade thrust

occurs when the grass blade or saw blade hits an

object that cannot be cut. In areas where it is not

easy to see the material being cut the risk of blade

thrust increases.

• When a blade thrust occurs, there is a risk that the

product or the operator moves out of position. A

blade that moves can hit bystanders and there is a

risk of injuries.

• If a blade is bent, has cracks, is broken or damaged,

discard the blade.

• Use a sharp blade. The risk of blade thrust increases

when a blade is not sharp.

Fuel safety

WARNING: Read the warning instructions

that follow before you use the product.

• Do not mix the fuel indoor or near a heat source.
• Do not start the product if there is fuel or engine oil

on the product. Remove the unwanted fuel/oil and let

the product dry. Remove unwanted fuel from the

product.

• If you spill fuel on your clothing, change clothing

immediately.

• Do not get fuel on your body, it can cause injury. If

you get fuel on your body, use a soap and water to

remove the fuel.

• Do not start the engine if you spill oil or fuel on the

product or on your body.

• Do not start the product if the engine has a leak.

Examine the engine for leaks regularly.

• Be careful with fuel. Fuel is flammable and the fumes

are explosive and can cause injuries or death.

881 - 001 - 10.10.2018

13