Omron HBP-1300 - Инструкция по эксплуатации - Страница 6

4

Before use / during use

Warning

The unit complies with the EMC standard (IEC60601-1-2). As such, it can be used simultaneously 

with multiple medical instruments. However, if instruments that generate noise such as an electric 

scalpel or a microwave therapy device are near the unit, check the operation of the unit during and 

after use of these instruments.
If an error occurs or a measurement result is questionable, check the vital signs of the patient by 

auscultation or palpation. Avoid relying solely on the measurement results of the unit when judging 

the patient’s condition.
Only trained healthcare providers should use this device.  Do not allow patients to operate this 

device.
Properly connect the connectors and AC adapter cable.
Do not place objects or liquids on top of this unit.
Check the following before using the unit:

- Make sure the AC adapter cable is not damaged (wires are not exposed or broken), and the 

connections are firm.

For the AC adapter connected to the unit, supplies, and optional devices, use only the standard 

accessories or OMRON-specified products.
Do not use in a location with moisture, or a location where water may splash on the unit.

This unit is intended for use in physicians’ office, hospitals, clinics and other medical facilities.
Do not use the unit if it emits smoke, an abnormal odor, or abnormal noise.
Do not bring cellular telephones or transceivers into the room where the unit is installed or being 

used.
Do not connect multiple monitors to the same patient.
Do not connect the unit to a power outlet that is controlled by a wall switch.

HBP-1300-E main.book  Page 4  Thursday, February 11, 2016  11:39 AM