Omron HBP-1300 - Инструкция по эксплуатации - Страница 24

22

Irregular pulse wave detection function

If the pulse wave interval becomes irregular during measurement, the irregular pulse wave detection 

icon will light to notify you.

Body movement detection function

If body movement is detected during measurement, deflation stops for 5 seconds. The irregular pulse 

wave icon appears in the measurement result display.

After 5 seconds, measurement resumes, and an attempt is made to complete measurement in one 

cycle.

Taking the Measurement in “Auscultation Mode”

Use a stethoscope to perform measurement.

When set to “ON”, SYS and DIA can be recorded using auscultation measurement.

To determine SYS and DIA during measurement, press the [MODE] button.

SYS is registered the first time and DIA is registered the second time you press the [MODE] button 

during deflation.

After DIA is determined, the cuff rapidly deflates and SYS and DIA are displayed as the measurement 

results.

The pulse rate does not appear in the measurement result display.

During deflation, the [

] button can be held down to re-inflate, or the [

] button can be held down to 

deflate faster.

Stored data that was measured in “Auscultation Mode” is displayed when the auscultation icon is lit.

Note:

The body movement detection function is disabled while “Auscultation Mode” is in use.

For Auscultation Mode settings, see page 16.

Q

 Deflation stopped

Q

 During re-inflation

HBP-1300-E main.book  Page 22  Thursday, February 11, 2016  11:39 AM