Samsung UE22F5000AKXRU - Инструкция по эксплуатации - Страница 13

English

Issues

Solutions and Explanations

Your settings are lost after 30 minutes 
or every time the TV is turned off.

• 

If the TV is in the 

Store Demo

 mode, it will reset audio and picture settings every 30 minutes. If you want to change 

the settings from 

Store Demo

 mode to 

Home Use

, press the 

SOURCE 

button to select 

TV

 mode, and go to 

MENU

-

Support

-

Use Mode

. 

You have intermittent loss of audio 
or video.

• 

Check the cable connections and reconnect them. 

• 

Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for 
long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.

You see small particles when you 
look closely at the edge of the frame 
of the TV.

• 

This is part of the product’s design and is not a defect.

The 

PIP

 menu is not available.

• 

PIP

 functionality is only available when you are using a HDMI or components source.

You turned the TV off 45 minutes 
ago, and it turned on again.

• 

It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your 
watching TV.

The message “

Scrambled Signal

” or 

“

Weak or No Signal

” appears.

• 

If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot.

• 

If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again.

There are recurrent picture/sound 
issues.

• 

Check and change the signal/source.

A reaction may occur between the 
rubber cushion pads on the base 
stand and the top finish of some 
furniture.

• 

To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.

The message “

This file may not be 

playable properly.

” appears.

• 

This may appear because of high bit rate of content. Content generally will play but could experience some playability 
issue.

✎

You can keep your TV in optimum operating condition by upgrading to the latest firmware (www.samsung.com 

→

 Support) by 

USB. 

✎

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may 

be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. 

English - 13

[UF40005000-RU]BN68-04784J.indb   13

2013-02-22     9:55:00