Sparky VC 1530SP - Инструкция по эксплуатации - Страница 12

10

VC 1530SP • VC 1530SA • VCM 1530SP • VCM 1530SA

EN

VI - Maintenance 

During maintenance and cleaning, handle the 

vacuum cleaner in such a manner that there is no 

danger for maintenance staff or other persons.

In the maintenance area use filtered compulsory 

ventilation and wear protective clothing. Clean the 

maintenance area in a way preventing harmful 

substances to enter into the surroundings.
A dust test must be performed at least once a year 

by SPARKY service or a trained person. This test 

includes checking for a damaged filter, the sealing 

of the vacuum cleaner and the proper functioning 

of the control devices.

m-class vacuum cleaners only

During maintenance and cleaning ensure that 

dust is not unnecessarily spread around.
We recommend wearing a P2 breathing mask 

during maintenance and cleaning.
Before removing the vacuum cleaner from the 

area contaminated with harmful substances clean 

the outside of the vacuum cleaner, wipe it clean or 

pack the vacuum cleaner in well sealed packaging 

and avoid spreading deposited harmful dust.
During maintenance and repair all contaminated 

parts which could not be cleaned satisfactorily 

shall be packed in well sealed bags and disposed 

of in a manner complying with the valid regula-

tions for such waste removal.

maintenance 

schedule

After completion 

of work

When  

necessary

Emptying the tank

●

Replacing the 

fleece filter bag

●

Replacing the 

disposal bag

●

Replacing the PET 

cartridge filter 

(VC 1530SP,  

VCM 1530SP)

●

Replacing the flat 

filter (VC 1530SA, 

VCM 1530SA)

●

EmptyING tHE tANK

▪

Switch off and unplug the vacuum cleaner.

▪

Open the clamps and remove the upper sec-

tion.

▪

Take the tank out of the vacuum cleaner by the 

handles.

▪

Tilt out the collected material.

▪

Clean the tank rib and seals before placing the 

upper section. If the seal or groove is dirty or 

damaged, the suction performance will be re-

duced.

▪

Attach the upper section back on the vacuum 

cleaner.

▪

Close the clamps and ensure that they fit 

properly.

▪

Before inserting the suction hose back clean 

the inlet fitting and hose collar.

REplAcING tHE flEEcE fIltER bAG 

(vc 1530sp, vcm 1530sp)

▪

Switch off and unplug the vacuum cleaner.

▪

Open the clamps and remove the upper sec-

tion.

Removing the fleece filter bag

–  Remove  the  hard  carton  insert  of  the  filter 

bag from the inlet fitting carefully.

–  Close the hard carton insert of the bag.

–  Dispose of the filter bag in accordance with 

legal regulations.

Inserting the fleece filter bag

–  Clean the tank.

–  Insert a new filter bag into the tank.

–  Press the hard carton insert of the bag to the 

inlet fitting carefully.

▪

Attach the upper section back on the vacuum 

cleaner.

▪

Close the clamps and ensure that they fit prop-

erly.

REplAcING tHE DIsposAl bAG  

(vc 1530sA, vcm 1530sA)

▪

Switch off and unplug the vacuum cleaner.

▪

Open the clamps and remove the upper sec-

tion.

Removing the disposal bag

–  Tie the disposal bag with a cord.

–  Remove the hard carton insert of the dispos-

al bag from the inlet fitting carefully.

–  Close the hard carton insert of the bag.

–  Dispose of the bag in accordance with legal 

regulations.

Inserting the disposal bag

–  Clean the tank.

–  Insert a new disposal bag into the tank.

–  Check that the disposal bag ventilation open-

ings 

v

 remain inside the tank.

–  Press the hard carton insert of the bag firmly 

to the inlet fitting. 

–  Fold the top edge of the disposal bag over 

the tank rim.

▪

Attach the upper section back on the vacuum 

cleaner.