Makita DVC261ZX11 - Инструкция по эксплуатации - Страница 15

15 ENGLISH

3.

  To install the filter, insert the side without the flap 

into the holder then push the filter downward until the 

flap is secured by the rib.

► 

Fig.34:

1.

 Holder 

2.

 HEPA filter 

3.

 Rib 

4.

 Flap

Cleaning the dust bag

Regularly clean the dust bag with soap and water. Turn 

the dust bag inside out and remove the sticky dust. 

Wash lightly by hand and rinse well with water. Dry 

completely before installing to the vacuum cleaner.

► 

Fig.35

NOTICE:

 Wet dust bag lowers the vacuuming per-

formance as well as the life of the motor.

Clearing the clog

When clearing the clog, remove the hose or the exten-

sion wand, or the bent pipe assembly to check inside.

Removing/attaching the snap-on type bent pipe 

assembly

To remove, pull the bent pipe assembly while pressing 

both of the tab on the hose end.

To attach, insert the hose end into the bent pipe assem-

bly. Make sure that the tabs on the hose end snap into 

the holes on the bent pipe assembly.

► 

Fig.36:

1.

 Hose end 

2.

 Tab 

3.

 Hole 

4.

 Bent pipe 

assembly

Removing/attaching the screw-in type bent pipe 

assembly

To remove, loosen the sleeve of bent pipe assembly 

from the hose.

To attach, fasten the sleeve of bent pipe assembly onto 

the hose.

► 

Fig.37:

1.

 Hose 

2.

 Bent pipe assembly 

3.

 Sleeve

OPTIONAL 

ACCESSORIES

CAUTION:

These accessories or attachments 

are recommended for use with your Makita tool 

specified in this manual.

 The use of any other 

accessories or attachments might present a risk of 

injury to persons. Only use accessory or attachment 

for its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service 

Center.
• 

Hose (for vacuum cleaner type)

• 

Hose (for dust extraction type)

• 

Extension wand

• 

Free nozzle

• 

T-shape nozzle

• 

Seat nozzle

• 

Corner nozzle

• 

Shelf brush

• 

Round brush

• 

Bent pipe assembly

• 

Filter bag

• 

Dust bag

• 

Front cuff

• 

HEPA filter

• 

Makita genuine battery and charger

NOTE:

 Some items in the list may be included in the 

tool package as standard accessories. They may 

differ from country to country.