Смартфоны Siemens С62 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Notes A-Z
76
s A-Z
Battery quality statement
The capacity of your mobile phone
battery will reduce each time it is
charged/emptied. Storage at too
high or low temperatures will also
result in a gradual capacity loss.
As a result the operating time of
your mobile phone may be
considerably reduced, even after a
full recharge of the battery.
Regardless of this, the battery has
been designed and manufactured so
that it can be recharged and used for
six months after the purchase of
your mobile phone. After six
months, if the battery is clearly suf-
fering from loss of performance, we
recommend that you replace it.
Please buy only Siemens original
batteries.
Control codes (DTMF)
Sending conrol codes
You can enter control codes (digits)
during a call so that an answering
machine can be controlled remotely.
These digits are directly transmitted
as DTMF tones (control codes).
§Menu§
Open call menu.
Send DTMF
Select.
Use the Addressbook
Save phone numbers
and
control
codes (DTMF tones) in the Address-
book like a normal entry.
J
Enter phone number.
0
Press until a "+" appears
on the display (pause for
connection setup).
J
Enter DTMF signals
(digits).
0
If necessary enter further
pauses of three seconds
each to ensure correct
processing at destination.
J
Enter a name.
§Save§
Press.
You can also store just the DTMF
tones (digits) without a phone
number and send these during
a call.
