Ryobi ONE+ LCDI1802M - Инструкция по эксплуатации - Страница 10

5

English

GB

FR

DE

ES

IT

NL

PT

DK

SE

FI

NO

RU

PL

CZ

HU

RO

LV

LT

EE

HR

SI

SK

GR

TR

OPERATION

■

Depress the switch trigger to start the drill.

■

Move the drill bit into the workpiece, applying only 
enough pressure to keep the bit cutting. Do not force 
the drill or apply side pressure to elongate a hole. Let 
the tool do the work.

WARNING

:

Be prepared for binding at bit breakthrough. 
When these situations occur, drill has a tendency 
to grab and kick opposite to the direction of 
rotation and could cause loss of control when 
breaking through material. If not prepared, this 
loss of control can result in possible ser ious 
injury.

■

When drilling hard, smooth surfaces, use a center 
punch to mark the desired hole location. This will 
prevent the drill bit from slipping off-center as the hole 
is started.

■

When drilling metals, use a light oil on the drill bit to 
keep it from overheating. The oil will prolong the life of 
the bit and increase the drilling action.

■

If the bit jams in the workpiece or if the drill stalls, 
stop the tool immediately. Remove the bit from the 
workpiece and determine the reason for jamming.

NOTE:

 This drill has an electric brake. When the switch 

trigger is released, the chuck stops turning. When the 
brake is functioning proper ly, spar ks will be visible 
through the vent slots on the housing. This is normal and 
is the action of the brake.

MAINTENANCE

WARNING

W h e n   s e r v i c i n g ,   u s e   o n l y   i d e n t i c a l   RYO B I 
replacement par ts. Use of any other par ts may 
create a hazard or cause product damage.

Avoid using solvents when cleaning plastic par ts. Most 
plastics are susceptible to damage from various types of 
commercial solvents and may be damaged by their use. 
Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING

Do not at any time let brake fluids, gasoline, 
petroleumbased products, penetrating oils, etc., 
come in contact with plastic parts. Chemicals can 
damage, weaken or destroy plastic which may 
result in serious personal injury.

Do not abuse power tools. Abusive practices can damage

tool as well as workpiece.

WARNING

Do not attempt to modify this tool or create 
accessories not recommended for use with this 
tool. Any such alteration or modification is misuse 
and could result in a hazardous condition leading 
to possible serious personal injury.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing 
as waste. The machine, accessories and 
p a c k a g i n g   s h o u l d   b e   s o r t e d   f o r 
environmental-friendly recycling.

SYMBOLS

Safety Alert

   V           Volts

  min

-1

Revolutions or reciprocations per minute

 Direct 

current

 CE 

Conformity

     Please read the instructions carefully before  

starting the machine.

 Recycle 

unwanted

 Wa s t e   e l e c t r i c a l   p r o d u c t s   s h o u l d   n o t   b e 
disposed of with household waste. Please 
recycle where facilities exist. Check with your 
Local Authority or retailer for recycling advice.