Makita TD001GZ - Инструкция по эксплуатации - Страница 6

6 ENGLISH

NOTE:

 The declared noise emission value(s) has been 

measured in accordance with a standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared noise emission value(s) may 

also be used in a preliminary assessment of exposure.

WARNING:

Wear ear protection.

WARNING:

The noise emission during actual 

use of the power tool can differ from the declared val

-

ue(s) depending on the ways in which the tool is used 

especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures 

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such 

as the times when the tool is switched off and when 

it is running idle in addition to the trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter

-

mined according to EN62841-2-2:

Work mode: impact tightening of fasteners of the maxi-

mum capacity of the tool

Vibration emission (a

h

) : 10.0 m/s

2

Uncertainty (K) : 1.5 m/s

2

NOTE:

 The declared vibration total value(s) has been 

measured in accordance with a standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared vibration total value(s) may also 

be used in a preliminary assessment of exposure.

WARNING:

The vibration emission during actual 

use of the power tool can differ from the declared val

-

ue(s) depending on the ways in which the tool is used 

especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures 

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such 

as the times when the tool is switched off and when it 

is running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A 

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specifications provided 

with this power tool.

 Failure to follow all instructions 

listed below may result in electric shock, fire and/or 

serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

Cordless impact driver safety 

warnings

1. 

Hold the power tool by insulated gripping 

surfaces, when performing an operation 

where the fastener may contact hidden wiring.

Fasteners contacting a "live" wire may make 

exposed metal parts of the power tool "live" and 

could give the operator an electric shock.

2. 

Always be sure you have a firm footing.

Be sure no one is below when using the tool in 

high locations.

3. 

Hold the tool firmly.

4. 

Wear ear protectors.

5. 

Do not touch the bit or the workpiece immedi-

ately after operation. They may be extremely 

hot and could burn your skin.

6. 

Keep hands away from rotating parts.

7. 

Use auxiliary handle(s), if supplied with the 

tool.

 Loss of control can cause personal injury.

8. 

Hold the power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting accessory may contact hidden 

wiring.

 Cutting accessory contacting a "live" 

wire may make exposed metal parts of the power 

tool "live" and could give the operator an electric 

shock.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity 

with product (gained from repeated use) replace 

strict adherence to safety rules for the subject 

product.
MISUSE or failure to follow the safety rules stated 

in this instruction manual may cause serious 

personal injury.

Important safety instructions for 

battery cartridge

1. 

Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery 

charger, (2) battery, and (3) product using 

battery.

2. 

Do not disassemble or tamper the battery 

cartridge.

 It may result in a fire, excessive heat, 

or explosion.

3. 

If operating time has become excessively 

shorter, stop operating immediately. It may 

result in a risk of overheating, possible burns 

and even an explosion.

4. 

If electrolyte gets into your eyes, rinse them 

out with clear water and seek medical atten-

tion right away. It may result in loss of your 

eyesight.