Makita DTD172Z - Инструкция по эксплуатации - Страница 5

5 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model:

DTD172

Fastening capacities

Machine screw

M4 - M8

Standard bolt

M5 - M16

High tensile bolt

M5 - M14

No load speed

Max impact mode

0 - 3,600 min

-1

Hard impact mode

0 - 3,200 min

-1

Medium impact mode

0 - 2,100 min

-1

Soft impact mode

0 - 1,100 min

-1

Wood mode

0 - 1,800 min

-1

Bolt mode

0 - 3,600 min

-1

T mode (1)

0 - 2,900 min

-1

T mode (2)

0 - 3,600 min

-1

Impacts per minute

Max impact mode

0 - 3,800 min

-1

Hard impact mode

0 - 3,600 min

-1

Medium impact mode

0 - 2,600 min

-1

Soft impact mode

0 - 1,100 min

-1

Wood mode

0 - 3,800 min

-1

Bolt mode

0 - 3,800 min

-1

T mode (1)

-

T mode (2)

0 - 2,600 min

-1

Rated voltage

D.C. 18 V

Overall length

114 mm

Net weight

1.2 - 1.5 kg

• 

Due to our continuing program of research and development, the specifications herein are subject to change 

without notice.

• 

Specifications may differ from country to country.

• 

The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi

-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge

BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B

Charger

DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / 

DC18SH / DC18WC

• 

Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.

WARNING:

Only use the battery cartridges and chargers listed above.

 Use of any other battery cartridges 

and chargers may cause injury and/or fire.

Intended use

The tool is intended for screw driving in wood, metal 

and plastic.

Noise

The typical A-weighted noise level determined accord

-

ing to EN62841-2-2:

Sound pressure level (L

pA

) : 97 dB (A)

Sound power level (L

WA

) : 108 dB (A)

Uncertainty (K) : 3 dB (A)

NOTE:

 The declared noise emission value(s) has 

been measured in accordance with a standard test 

method and may be used for comparing one tool with 

another.

NOTE:

 The declared noise emission value(s) 

may also be used in a preliminary assessment of 

exposure.