Makita DHP482RFE3 - Инструкция по эксплуатации - Страница 3

3

ENGLISH

4. 

Remove any adjusting key or wrench before 

turning the power tool on.

 A wrench or a key left 

attached to a rotating part of the power tool may 

result in personal injury.

5. 

Do not overreach. Keep proper footing and 

balance at all times.

 This enables better control 

of the power tool in unexpected situations.

6. 

Dress properly. Do not wear loose clothing or 

jewellery. Keep your hair, clothing, and gloves 

away from moving parts.

 Loose clothes, jewel

-

lery or long hair can be caught in moving parts.

7. 

If devices are provided for the connection of 

dust extraction and collection facilities, ensure 

these are connected and properly used.

 Use of 

dust collection can reduce dust-related hazards.

Power tool use and care

1. 

Do not force the power tool. Use the correct 

power tool for your application.

 The correct 

power tool will do the job better and safer at the 

rate for which it was designed.

2. 

Do not use the power tool if the switch does 

not turn it on and off.

 Any power tool that cannot 

be controlled with the switch is dangerous and 

must be repaired.

3. 

Disconnect the plug from the power source 

and/or the battery pack from the power tool 

before making any adjustments, changing 

accessories, or storing power tools.

 Such pre-

ventive safety measures reduce the risk of starting 

the power tool accidentally.

4. 

Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with 

the power tool or these instructions to operate 

the power tool.

 Power tools are dangerous in the 

hands of untrained users.

5. 

Maintain power tools. Check for misalignment 

or binding of moving parts, breakage of parts 

and any other condition that may affect the 

power tool’s operation. If damaged, have the 

power tool repaired before use.

 Many accidents 

are caused by poorly maintained power tools.

6. 

Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges 

are less likely to bind and are easier to control.

7. 

Use the power tool, accessories and tool bits 

etc. in accordance with these instructions, tak-

ing into account the working conditions and 

the work to be performed.

 Use of the power tool 

for operations different from those intended could 

result in a hazardous situation.

Battery tool use and care

1. 

Recharge only with the charger specified by 

the manufacturer.

 A charger that is suitable for 

one type of battery pack may create a risk of fire 

when used with another battery pack.

2. 

Use power tools only with specifically desig

-

nated battery packs.

 Use of any other battery 

packs may create a risk of injury and fire.

3. 

When battery pack is not in use, keep it away 

from other metal objects, like paper clips, 

coins, keys, nails, screws or other small metal 

objects, that can make a connection from one 

terminal to another.

 Shorting the battery termi-

nals together may cause burns or a fire.

4. 

Under abusive conditions, liquid may be 

ejected from the battery; avoid contact. If con-

tact accidentally occurs, flush with water. If 

liquid contacts eyes, additionally seek medical 

help.

 Liquid ejected from the battery may cause 

irritation or burns.

Service

1. 

Have your power tool serviced by a qualified 

repair person using only identical replacement 

parts.

 This will ensure that the safety of the power 

tool is maintained.

2. 

Follow instruction for lubricating and chang-

ing accessories.

3. 

Keep handles dry, clean and free from oil and 

grease.

Cordless hammer driver drill safety 

warnings

1. 

Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

2. 

Use auxiliary handle(s), if supplied with the 

tool.

 Loss of control can cause personal injury.

3. 

Hold power tool by insulated gripping sur-

faces, when performing an operation where 

the cutting accessory may contact hidden 

wiring.

 Cutting accessory contacting a "live" 

wire may make exposed metal parts of the power 

tool "live" and could give the operator an electric 

shock.

4. 

Hold power tool by insulated gripping sur-

faces, when performing an operation where 

the fastener may contact hidden wiring.

Fasteners contacting a "live" wire may make 

exposed metal parts of the power tool "live" and 

could give the operator an electric shock.

5. 

Always be sure you have a firm footing. Be 

sure no one is below when using the tool in 

high locations.

6. 

Hold the tool firmly.

7. 

Keep hands away from rotating parts.

8. 

Do not leave the tool running. Operate the tool 

only when hand-held.

9. 

Do not touch the bit or the workpiece immedi-

ately after operation; they may be extremely 

hot and could burn your skin.

10. 

Some material contains chemicals which may 

be toxic. Take caution to prevent dust inhala-

tion and skin contact. Follow material supplier 

safety data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity 

with product (gained from repeated use) replace 

strict adherence to safety rules for the subject 

product. MISUSE or failure to follow the safety 

rules stated in this instruction manual may cause 

serious personal injury.