Makita DHP482RFE3 - Инструкция по эксплуатации - Страница 2

2

ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model:

DHP482

Drilling capacities

Concrete

13 mm (1/2")

Steel

13 mm (1/2")

Wood

38 mm (1-1/2")

Fastening capacities

Wood screw

10 mm x 90 mm (3/8" x 3-1/2")

Machine screw

M6 (1/4")

No load speed (RPM)

High (2)

0 - 1,900 /min

Low (1)

0 - 600 /min

Blows per minute

High (2)

0 - 28,500 /min

Low (1)

0 - 9,000 /min

Overall length

198 mm (7-3/4")

Rated voltage

D.C. 18 V

Standard battery cartridge

BL1815N, BL1820, BL1820B

BL1830, BL1840, BL1850, 

BL1840B, BL1850B

Net weight

1.5 kg (3.4 lbs)

1.8 kg (3.9 lbs)

• 

Due to our continuing program of research and development, the specifications herein are subject to change 

without notice.

• 

Specifications and battery cartridge may differ from country to country.

• 

Weight, with battery cartridge, according to EPTA-Procedure 01/2003

General power tool safety warnings

WARNING:

Read all safety warnings and 

all instructions. 

Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 

serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

Work area safety

1. 

Keep work area clean and well lit.

 Cluttered or 

dark areas invite accidents.

2. 

Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable 

liquids, gases or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

3. 

Keep children and bystanders away while 

operating a power tool.

 Distractions can cause 

you to lose control.

Electrical Safety

1. 

Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any 

adapter plugs with earthed (grounded) power 

tools. 

Unmodified plugs and matching outlets will 

reduce risk of electric shock.

2. 

Avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges and 

refrigerators.

 There is an increased risk of elec-

tric shock if your body is earthed or grounded.

3. 

Do not expose power tools to rain or wet con-

ditions.

 Water entering a power tool will increase 

the risk of electric shock.

4. 

Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges 

or moving parts.

 Damaged or entangled cords 

increase the risk of electric shock.

5. 

When operating a power tool outdoors, use an 

extension cord suitable for outdoor use.

 Use of 

a cord suitable for outdoor use reduces the risk of 

electric shock.

6. 

If operating a power tool in a damp location is 

unavoidable, use a ground fault circuit inter-

rupter (GFCI) protected supply.

 Use of a GFCI 

reduces the risk of electric shock.

Personal Safety

1. 

Stay alert, watch what you are doing and use 

common sense when operating a power tool. 

Do not use a power tool while you are tired or 

under the influence of drugs, alcohol or med

-

ication.

 A moment of inattention while operating 

power tools may result in serious personal injury.

2. 

Use personal protective equipment. Always 

wear eye protection.

 Protective equipment such 

as dust mask, non-skid safety shoes, hard hat, or 

hearing protection used for appropriate conditions 

will reduce personal injuries.

3. 

Prevent unintentional starting. Ensure the 

switch is in the off-position before connecting 

to power source and/or battery pack, picking 

up or carrying the tool.

 Carrying power tools with 

your finger on the switch or energising power tools 

that have the switch on invites accidents.