Dewalt 18 В XR FLEXVOLT ADVANTAGE XRP DCD999NT-XJ - Инструкция по эксплуатации - Страница 7

5

English

Additional Specific Safety Rules for Drills/
Drivers/Hammerdrills

• 

Wear ear protectors when impact drilling.

 Exposure to 

noise can cause hearing loss.

• 

Use the auxiliary handles, if supplied with the tool. 

Loss 

of control can cause personal injury.

• 

Brace the tool properly before use. 

This tool produces a 

high output torque and without properly bracing the tool 
during operation, loss of control may occur resulting in 
personal injury.

• 

Hold the power tool by insulated gripping surfaces when 
performing an operation where the cutting accessory 
may contact hidden wiring. 

Cutting accessory or fasteners 

contacting a “live” wire may make exposed metal parts of the 
power tool “live” and could give the operator an electric shock.

surfaces do not allow for safe handling and control of the 
tool in unexpected situations.

5)  Battery Tool Use and Care

a ) 

Recharge only with the charger specified by the 
manufacturer.

 A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 
another battery pack.

b ) 

Use power tools only with specifically designated 
battery packs.

 Use of any other battery packs may create 

a risk of injury and fire.

c ) 

When battery pack is not in use, keep it away from 
other metal objects, like paper clips, coins, keys, 
nails, screws or other small metal objects, that can 
make a connection from one terminal to another.

Shorting the battery terminals together may cause burns 
or a fire.

d ) 

Under abusive conditions, liquid may be ejected 
from the battery; avoid contact. If contact 
accidentally occurs, flush with water. If liquid 
contacts eyes, additionally seek medical help.

 Liquid 

ejected from the battery may cause irritation or burns.

e ) 

Do not use a battery pack or tool that is damaged or 
modified.

 Damaged or modified batteries may exhibit 

unpredictable behaviour resulting in fire, explosion or risk 
of injury.

f ) 

Do not expose a battery pack or tool to fire or 
excessive temperature.

 Exposure to fire or temperature 

above 130 °C may cause explosion.

g ) 

Follow all charging instructions and do not charge 
the battery pack or tool outside the temperature 
range specified in the instructions.

 Charging 

improperly or at temperatures outside the specified range 
may damage the battery and increase the risk of fire.

6)  Service

a ) 

Have your power tool serviced by a qualified repair 
person using only identical replacement parts.

This 

will ensure that the safety of the power tool is maintained.

b ) 

Never service damaged battery packs.

 Service 

of battery packs should only be performed by the 
manufacturer or authorized service providers.

the tool. 

Carrying power tools with your finger on the 

switch or energising power tools that have the switch on 
invites accidents.

d ) 

Remove any adjusting key or wrench before turning 
the power tool on. 

A wrench or a key left attached 

to a rotating part of the power tool may result in 
personal injury.

e ) 

Do not overreach. Keep proper footing and balance 
at all times. 

This enables better control of the power tool 

in unexpected situations.

f ) 

Dress properly. Do not wear loose clothing or 
jewellery. Keep your hair and clothing away from 
moving parts.

 Loose clothes, jewellery or long hair can be 

caught in moving parts.

g ) 

If devices are provided for the connection of dust 
extraction and collection facilities, ensure these are 
connected and properly used. 

Use of dust collection 

can reduce dust‑related hazards.

h ) 

Do not let familiarity gained from frequent use of 
tools allow you to become complacent and ignore 
tool safety principles.

 A careless action can cause severe 

injury within a fraction of a second.

4)  Power Tool Use and Care

a ) 

Do not force the power tool. Use the correct power 
tool for your application. 

The correct power tool 

will do the job better and safer at the rate for which it 
was designed.

b ) 

Do not use the power tool if the switch does not turn 
it on and off. 

Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

c ) 

Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from 
the power tool before making any adjustments, 
changing accessories, or storing power tools. 

Such 

preventive safety measures reduce the risk of starting the 
power tool accidentally.

d ) 

Store idle power tools out of the reach of children 
and do not allow persons unfamiliar with the power 
tool or these instructions to operate the power tool. 

Power tools are dangerous in the hands of untrained users.

e ) 

Maintain power tools and accessories. Check for 
misalignment or binding of moving parts, breakage 
of parts and any other condition that may affect the 
power tool’s operation. If damaged, have the power 
tool repaired before use. 

Many accidents are caused by 

poorly maintained power tools.

f ) 

Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges are less 
likely to bind and are easier to control.

g ) 

Use the power tool, accessories and tool bits etc. 
in accordance with these instructions, taking into 
account the working conditions and the work to be 
performed. 

Use of the power tool for operations different 

from those intended could result in a hazardous situation.

h ) 

Keep handles and grasping surfaces dry, clean and 
free from oil and grease.

 Slippery handles and grasping