Шуруповерты Bosch GSR 36 V LI - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

English |
25
Bosch Power Tools
1 609 929 M41 | (23.8.07)
Operating Instructions
f
Apply the power tool to the screw/nut only
when it is switched off.
Rotating tool inserts
can slip off.
Soft Grip
The gripping surface (soft grip)
4
reduces the
danger of slipping and thereby improves the
grip on the machine and the handling.
At the same time, the rubber coating achieves a
vibration-reducing effect.
Tips
After longer periods of working at low speed, al-
low the machine to cool down by running it for ap-
prox. 3 minutes at maximum speed with no load.
For drilling in metal, use only perfectly sharp-
ened HSS drill bits (HSS = high-speed steel). The
appropriate quality is guaranteed by the Bosch
accessories program.
Before screwing larger, longer screws into hard
materials, it is advisable to predrill a pilot hole
with the core diameter of the thread to approx.
2
/
3
of the screw length.
Recommendations for Optimal Handling of the
Battery
Protect the battery against moisture and water.
Store the battery only within a temperature
range between 0 ° C and 45 ° C. As an example,
do not leave the battery in the car in summer.
Occasionally clean the venting slots of the bat-
tery using a soft, clean and dry brush.
A significantly reduced working period after
charging indicates that the battery is used and
must be replaced.
Observe the notes for disposal.
Maintenance and Service
Maintenance and Cleaning
f
Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as
during transport and storage, remove the
battery from the power tool.
There is danger
of injury when unintentionally actuating the
On/Off switch.
f
For safe and proper working, always keep
the machine and ventilation slots clean.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
Replacing the Carbon Brushes (see figure H)
When the carbon brushes are worn, the power
tool switches off automatically. For replacement
of the carbon brushes, unscrew the screws of
the cover lids
18
and remove the cover lids
18
.
Insert a screwdriver or similar into the notch of
the brush holder
19
and and carefully pry it out.
Remove the used carbon brushes and replace
them. The new carbon brushes can also be in-
serted when turned by 180°. Lightly press the
inserted carbon brushes downward until they
can be clearly heard to engage. Afterwards
mount the cover lids
18
again.
After-sales service and customer
assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer consultants answer your ques-
tions concerning best buy, application and ad-
justment of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: SPT-Technical.de@de.bosch.com
OBJ_BUCH-487-001.book Page 25 Thursday, August 23, 2007 9:18 AM
Содержание
- 194 ) Осторожное обращение и применение
- 195 Крепление заготовки.; Описание функции; Применение по назначению
- 196 Технические данные
- 197 Данные по шуму и вибрации; Применяйте средства защиты органов слуха!; Заявление о соответствии
- 198 Сборка; Зарядка аккумулятора; Снятие аккумулятора
- 199 Смена сверлильного патрона
- 200 Работа с инструментом; Включение электроинструмента
- 201 Установка числа оборотов; Указания по применению; Рукоятка с мягкими накладками
- 202 Техобслуживание и сервис; Техобслуживание и очистка; Россия
- 203 Беларусь; Транспорт