Bosch GSR 36 V LI - Инструкция по эксплуатации - Страница 19

 English | 

19

Bosch Power Tools

1 609 929 M41 | (23.8.07)

f

Use appropriate detectors to determine if 
utility lines are hidden in the work area or 
call the local utility company for assistance. 

Contact with electric lines can lead to fire 
and electric shock. Damaging a gas line can 
lead to explosion. Penetrating a water line 
causes property damage or may cause an 
electric shock.

f

Switch off the power tool immediately 
when the tool insert jams. Be prepared for 
high reaction torque that can cause kick-
back. 

The tool insert jams when:

— the power tool is subject to overload or
— it becomes wedged in the workpiece.

f

Hold power tool by the insulated gripping 
surfaces, when performing an operation 
where the cutting tool may run into hidden 
wiring. 

Contact with a “live” wire will make 

exposed metal parts of the tool “live” and 
shock the operator.

f

When working with the machine, always 
hold it firmly with both hands and provide 
for a secure stance. 

The power tool is guided 

more secure with both hands.

f

Secure the workpiece. 

A workpiece clamped 

with clamping devices or in a vice is held 
more secure than by hand.

f

Do not work materials containing asbestos. 

Asbestos is considered carcinogenic.

f

Take protective measures when dust can 
develop during working that is harmful to 
one’s health, combustible or explosive. 

Ex-

ample: Some dusts are regarded as carcino-
genic. Wear a dust mask and work with 
dust/chip extraction when connectable.

f

Keep your workplace clean. 

Blends of mate-

rials are particularly dangerous. Dust from 
light alloys can burn or explode.

f

Always wait until the machine has come to 
a complete stop before placing it down. 

The 

tool insert can jam and lead to loss of control 
over the power tool.

f

Avoid unintentional switching on. Ensure 
the On/Off switch is in the off position be-
fore inserting battery pack. 

Carrying the 

power tool with your finger on the On/Off 
switch or inserting the battery pack into 
power tools that have the switch on invites 
accidents.

f

Do not open the battery. 

Danger of short-

circuiting.

Protect the battery against heat, e. g., 
also against continuous sun irradia-
tion and fire. 

There is danger of explo-

sion.

f

In case of damage and improper use of the 
battery, vapours may be emitted. Provide 
for fresh air and seek medical help in case 
of complaints. 

The vapours can irritate the 

respiratory system.

f

When the battery is defective, liquid can es-
cape and come into contact with adjacent 
components. Check any parts concerned. 

Clean such parts or replace them, if required.

Functional Description

Read all safety warnings and all in-
structions.  

Failure to follow the 

warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.

Intended Use

GSR 36 V-LI:

The machine is intended for driving in and loos-
ening screws as well as for drilling in wood, met-
al, ceramic and plastic.

GSB 36 V-LI:

The machine is intended for driving in and loos-
ening screws as well as for drilling in wood, met-
al, ceramic and plastic and for impact drilling in 
brick, brickwork and stone.

OBJ_BUCH-487-001.book  Page 19  Thursday, August 23, 2007  9:18 AM