Bosch GWX 9-125 S X-LOCK (06017B2000) - Инструкция по эксплуатации - Страница 23

English | 

23

Switch on the power tool
and position it with the
front part of the guide block
on the workpiece. Move the
power tool with a moderate
feed motion that is suited to
the material being ma-
chined.
When cutting especially
hard materials such as con-

crete with a high pebble content, the diamond cutting disc
can overheat and become damaged as a result. This is
clearly indicated by circular sparking, rotating with the dia-
mond cutting disc.
If this happens, stop cutting and allow the diamond cutting
disc to cool down by running the power tool for a short time
at maximum speed with no load.
Working noticeably slower and with circular sparking indic-
ate that the diamond cutting disc that has become dull. You
can resharpen the disc by briefly cutting into abrasive mater-
ial (e.g. lime-sand brick).

Information on structural design

Slots in load-bearing walls are subject to DIN 1053 part 1 or
country-specific regulations. These regulations must be ob-
served under all circumstances. Seek advice from the re-
sponsible structural engineer, architect or construction su-
pervisor before starting work.

Maintenance and Servicing

Maintenance and cleaning

u

Pull the plug out of the socket before carrying out any
work on the power tool.

u

To ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.

u

In extreme conditions, always use a dust extractor if
possible. Blow out ventilation slots frequently and in-
stall a residual current device (RCD) upstream.

 When

machining metals, conductive dust can settle inside the
power tool, which can affect its protective insulation.

Store and handle the accessories carefully.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by 

Bosch

 or by an

after-sales service centre that is authorised to repair 

Bosch

power tools.

After-sales service and advice on using products

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: 

www.bosch-pt.com

The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.

In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.) 
P.O. Box 98 
Broadwater Park 
North Orbital Road 
Denham Uxbridge
UB 9 5HJ 
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair. 
Tel. Service: (0344) 7360109 
E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd. 
Unit 23 Magna Drive 
Magna Business Park 
City West 
Dublin 24 
Tel. Service: (01) 4666700 
Fax: (01) 4666888

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd. 
Power Tools 
Locked Bag 66 
Clayton South VIC 3169 
Customer Contact Center 
Inside Australia: 
Phone: (01300) 307044 
Fax: (01300) 307045
Inside New Zealand: 
Phone: (0800) 543353 
Fax: (0800) 428570
Outside AU and NZ: 
Phone: +61 3 95415555 
www.bosch-pt.com.au 
www.bosch-pt.co.nz

Republic of South Africa
Customer service

Hotline: (011) 6519600

Gauteng – BSC Service Centre

35 Roper Street, New Centre 
Johannesburg 
Tel.: (011) 4939375 
Fax: (011) 4930126 
E-mail: bsctools@icon.co.za

KZN – BSC Service Centre

Unit E, Almar Centre 
143 Crompton Street 
Pinetown 
Tel.: (031) 7012120 
Fax: (031) 7012446 
E-mail: bsc.dur@za.bosch.com

Western Cape – BSC Service Centre

Democracy Way, Prosperity Park 

Bosch Power Tools

1 609 92A 4FA | (21.01.2019)