Bosch GWS 180-LI (0.601.9H9.020) - Инструкция по эксплуатации - Страница 17

English | 

17

nected and properly used. 

 Use of dust collection can re-

duce dust-related hazards.

Power tool use and care

u

Do not force the power tool. Use the correct power
tool for your application. 

 The correct power tool will do

the job better and safer at the rate for which it was de-
signed.

u

Do not use the power tool if the switch does not turn it
on and off. 

 Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

u

Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. 

 Such preventive safety measures reduce the risk

of starting the power tool accidentally.

u

Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. 

 Power

tools are dangerous in the hands of untrained users.

u

Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation.
If damaged, have the power tool repaired before use. 

Many accidents are caused by poorly maintained power
tools.

u

Keep cutting tools sharp and clean. 

 Properly main-

tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.

u

Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed. 

 Use of the power tool for operations different

from those intended could result in a hazardous situation.

Battery tool use and care

u

Recharge only with the charger specified by the manu-
facturer. 

 A charger that is suitable for one type of bat-

tery pack may create a risk of fire when used with another
battery pack.

u

Use power tools only with specifically designated bat-
tery packs. 

 Use of any other battery packs may create a

risk of injury and fire.

u

When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another. 

Shorting the battery terminals together may cause burns
or a fire.

u

Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help. 

 Liquid ejected from the bat-

tery may cause irritation or burns.

Service

u

Have your power tool serviced by a qualified repair
person using only identical replacement parts. 

This

will ensure that the safety of the power tool is maintained.

Safety Warnings for Angle Grinder

Safety Warnings common for Grinding, Sanding, Wire
Brushing or Abrasive Cutting Off operations

u

This power tool is intended to function as a grinder,
sander, wire brush or cut-off tool. Read all safety
warnings, instructions, illustrations and specifica-
tions provided with this power tool. 

Failure to follow all

instructions listed below may result in electric shock, fire
and/or serious injury.

u

Operations such as polishing are not recommended to
be performed with this power tool. 

 Operations for

which the power tool was not designed may create a haz-
ard and cause personal injury.

u

Do not use accessories which are not specifically de-
signed and recommended by the tool manufacturer. 

Just because the accessory can be attached to your
power tool, it does not assure safe operation.

u

The rated speed of the accessory must be at least
equal to the maximum speed marked on the power
tool. 

 Accessories running faster than their rated speed

can break and fly apart.

u

The outside diameter and the thickness of your ac-
cessory must be within the capacity rating of your
power tool. 

Incorrectly sized accessories cannot be ad-

equately guarded or controlled.

u

Threaded mounting of accessories must match the
grinder spindle thread. For accessories mounted by
flanges, the arbour hole of the accessory must fit the
locating diameter of the flange.

 Accessories that do not

match the mounting hardware of the power tool will run
out of balance, vibrate excessively and may cause loss of
control.

u

Do not use a damaged accessory. Before each use in-
spect the accessory such as abrasive wheels for chips
and cracks, backing pad for cracks, tear or excess
wear, wire brush for loose or cracked wires. If power
tool or accessory is dropped, inspect for damage or in-
stall an undamaged accessory. After inspecting and
installing an accessory, position yourself and bystand-
ers away from the plane of the rotating accessory and
run the power tool at maximum no load speed for one
minute. 

Damaged accessories will normally break apart

during this test time.

u

Wear personal protective equipment. Depending on
application, use face shield, safety goggles or safety
glasses. As appropriate, wear dust mask, hearing pro-
tectors, gloves and workshop apron capable of stop-
ping small abrasive or workpiece fragments.

 The eye

protection must be capable of stopping flying debris gen-
erated by various operations . The dust mask or respir-
ator must be capable of filtrating particles generated by

Bosch Power Tools

1 609 92A 5GT | (14.06.2021)