Bosch GEX 125 150 AVE - Инструкция по эксплуатации - Страница 22

22

 | English 

2 609 932 777 | (23.2.11)

Bosch Power Tools

Replacing the Sanding Sheet 

(see figure A)

To remove the sanding sheet 

10

, lift it from the 

side and pull it off of the sanding plate 

8

.

When attaching a new sanding sheet, remove 
any dust or debris from the sanding plate 

8

, e. g., 

with a brush.
The surface of the sanding plate 

8

 is fitted with 

Velcro backing for quick and easy fastening of 
sanding sheets with Velcro adhesion.
Press the sanding sheet 

10

 firmly against the 

bottom side of the sanding plate 

8

.

To ensure optimum dust extraction, pay atten-
tion that the punched holes in the sanding sheet 
match with the holes in the sanding plate.

Selection of the Sanding Plate

Depending on the application, the machine can 
be equipped with sanding plates of different 
hardness:
– Sanding plate, extra soft: Suitable for polish-

ing and sensitive sanding, incl. on convex sur-
faces.

– Soft sanding plate: Suitable for all sanding 

applications and general-purpose use.

– Hard sanding plate: Suitable for high sanding 

capacity on flat surfaces.

Replacing the Sanding Plate 

(see figure B)

Note: 

Replace a damaged sanding plate 

8

 imme-

diately.
Pull off the sanding sheet or polishing tool. 
Completely unscrew the screw 

11

 and take off 

the sanding plate 

8

. Attach the new sanding 

plate 

8

 and tighten the screw again.

Note: 

When attaching the sanding plate, pay at-

tention that the toothing of the drive element 
engage into the openings of the sanding plate.

Note: 

A damaged sanding-plate base may be 

changed only by an authorised after-sales serv-
ice agent for Bosch power tools.

Dust/Chip Extraction

f

Dusts from materials such as lead-containing 
coatings, some wood types, minerals and 
metal can be harmful to one’s health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are 
considered as carcinogenic, especially in 
connection with wood-treatment additives 
(chromate, wood preservative). Materials 
containing asbestos may only be worked by 
specialists.

– Automotive paint
– Masonry, stone
– Marble
– Granite
– Ceramic
– Glass
– Plexiglas
– Glass-fibre 

plastics

For pre-sanding

coarse

80

For shaping and braking edges

medium

100
120

For final sanding and forming

fine

180
240
320
400

For polish-sanding and rounding off edges

very fine

600

1 200

Material

Application

Grain size

OBJ_BUCH-1330-001.book  Page 22  Wednesday, February 23, 2011  9:55 AM