Сетевые хранилища SYNOLOGY DS223j - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
43
Notes:
If the power LED turns static, the ALERT light will likely be blinking orange, and the
Synology NAS will start beeping — this is normal and expected behavior. Once you
finish testing all of the drives, it should stop doing this unless one or more of your
drives are faulty.
Being able to ping the unit doesn't mean anything of note other than that the LAN
ports are functional. To properly do the above testing, ensure that the power LED goes
static and does not continue blinking.
Unable to finish powering on with no drives installed
Finish all steps in the section "
Unable to finish powering on (power LED is blinking
Follow the steps below and do an internal check:
a Unplug the power cord(s).
b Confirm that motherboard is properly installed and is Synology-manufactured.
c Clean up and reinstall the memory modules. Make sure that memory slots and memory
modules are free of dust, dirt, and other foreign matter.
If there is dust and dirt buildup inside the Synology NAS, clean it before trying the power-on
process.
If, after following the above troubleshooting steps and the issue is still unresolved, contact
Synology Technical Support for further assistance.
No power after pressing the power button
Do the following basic environmental check:
Confirm that the power cord(s) is functioning normally and that it is not damaged.
Confirm that the power cord(s) is properly plugged at both the power socket and the
Synology NAS.
Confirm that the AC power supply meets the voltage requirements 110V - 220V . If a UPS is
connected to the Synology NAS, disconnect it temporarily, and use AC power instead.
Remove all external I/O devices (such as external hard disks/USB/LAN/eSATA . Retain only the
power supply and confirm that the Synology NAS can power on properly.
If the Synology NAS is still unable to power on after doing the environmental check, follow the
steps below and do an internal check of your Synology NAS.
Remove the power cord(s) and remove the top cover.
Confirm that the LED cables are properly plugged in.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
