Сетевые хранилища SYNOLOGY DS223j - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

12
Prevent exposure to static electricity by doing the following:
Avoid hand contact by transporting and storing hardware components in static-safe
containers.
Keep electrostatic-sensitive hardware components in their containers until they arrive at
static-free workstations.
Place hardware components on a grounded surface or touch them before removing them from
their containers.
Avoid touching joints, pins, leads, or circuitry.
Always be properly grounded when touching a static-sensitive hardware component or
assembly.
When handling a hardware component, carefully hold it by the edges or the frame.
Use an electrostatic-discharge wrist strap or other ground systems. The Synology NAS should
be placed on an anti-static mat ESD mat).
The Synology NAS will provide standby power when it is connected to AC power even if it is
powered off. Damage can be done to the NAS if a conductor is accidentally touched and parts
are short-circuited under this condition. Before removing the top rear cover, make sure the AC
power supply is disconnected.
2.3 Safety instructions
Keep away from direct sunlight and chemicals. Ensure a stable environment with no
abrupt changes in temperature or humidity.
Place the unit right side up at all times.
Keep the unit away from liquids.
Before cleaning, unplug the power cord(s) and use a damp cloth to wipe the
surface. Do not use chemical aerosol cleaners.
To prevent the unit from falling over, do not place it on carts or any unstable
surfaces.
The power cord(s) must be plugged into the correct power supply voltage. Ensure
that the AC voltage provided is correct and stable.
Warning, electric shock hazard. To remove all electrical current from the device,
ensure that all power cords are disconnected from the power source.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)