Сетевые хранилища SYNOLOGY DS223j - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
11
Caution:
Leaving stray or loose screws inside your Synology NAS may severely damage its
components. Avoid dropping any metallic objects into the NAS, such as paper clips
and hairpins.
Do not pull a cable by its connector or its pull tab when disconnecting it. Certain
cables have connectors with locking tabs or thumb-screws that must be released
before disconnecting the cable. When disconnecting a cable, keep it evenly aligned to
avoid bending the connector pins. When connecting a cable, make sure that the ports
and the connectors are correctly oriented and aligned.
If you need to move your Synology NAS, get someone to assist you. Do not attempt to
lift it on your own to prevent injury.
Make sure that your Synology NAS is working correctly before installing optional
hardware components. If your Synology NAS is not working correctly, see the
"
" chapter to do basic troubleshooting. If the problem cannot be
solved, see the section "
Getting information, help, and service
" for more information.
Always carefully handle system components (such as PCIe cards, memory modules,
and system boards) by the edges or the frame. Do not touch solder joints, pins, or
exposed circuitry.
Do not place parts and other components (such as PCIe cards, memory modules, and
system boards) on the top cover of the NAS or other metal surfaces.
Only specific Synology NAS support the hot-swapping of components and are
designed to operate safely while it is turned on.
Before working inside your Synology NAS
Power off the Synology NAS, including all attached peripherals.
Disconnect the Synology NAS from the electrical outlet and disconnect the peripherals.
After working inside your Synology NAS
Reconnect the peripherals and connect the Synology NAS to an electrical outlet.
Power on the attached peripherals and then power on the Synology NAS.
Preventing electrostatic discharge
Static electricity discharge from a finger or other conductors might lead to system halt, loss of
data, or other damages to system boards or other static-sensitive components. This type of
damage may also reduce the life expectancy of the Synology NAS.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
