TP-LINK ARCHER GX90 AX6600 - Инструкция по эксплуатации - Страница 77

73

Chapter 12

Customize Your Network Settings

12  5   Create Static Routes

Static routing is a form of routing that is configured manually by a network administrator 
or a user by adding entries into a routing table. The manually-configured routing 
information guides the router in forwarding data packets to the specific destination.

I want to:

Visit multiple networks and servers at the same time.

For example,

 in a small office, my PC can surf the internet through Router A, but I also 

want to visit my company’s network. Now I have a switch and Router B. I connect the 
devices as shown in the following figure so that the physical connection between my 
PC and my company’s server is established. To surf the internet and visit my company’s 
network at the same time, I need to configure the static routing.

Company’s server

PC

Router B

Router A

Switch

LAN: 192.168.0.1

192.168.0.100

LAN: 192.168.0.2

WAN: 172.30.30.100

172.30.30.1

How can I do that?

1  

Change the routers’ LAN IP addresses to two different IP addresses on the same 
subnet. Disable Router B’s DHCP function.

2  

Visit 

http://tplinkwifi.net

, and log in with your TP-Link ID or the password you set for 

Router A. 

3  

Go to

 Advanced 

>

 Network

 > 

Routing

. 

4  

Click 

Add

 and finish the settings according to the following explanations: