Ecovacs Deebot T9 (DLX13-44) - Инструкция по эксплуатации - Страница 20

20

EN

No.

Malfunction

Possible Causes

Solutions

7

DEEBOT misses cleaning spots to 
be cleaned, or repeats cleaning the 
area cleaned.

The cleaning cycle is interfered by small objects or 
barriers on the floor.

Remove power cords and small objects from the floor to ensure 
cleaning efficiency. DEEBOT will automatically clean the area 
missed, please avoid moving DEEBOT manually or block the 
path during the cleaning cycle.

DEEBOT is working on slippery polished floors.

Make sure the floor wax is dried before DEEBOT starts cleaning.

DEEBOT is unable to reach certain areas blocked 
by furniture or barriers.

Tidy up the area to be cleaned by putting furniture and small 
objects in their proper place.

The TrueMapping Distance Sensor is blocked.

Remove the objects that are blocking the TrueMapping Distance 
Sensor.

8

DEEBOT is not able to connect to 
the home Wi-Fi network.

Incorrect home Wi-Fi username or password 
entered.

Enter the correct home Wi-Fi username and password.

Incorrect App installed.

Please download and install ECOVACS HOME App.

DEEBOT is not within range of your home Wi-Fi 
signal.

Make sure DEEBOT is within range of your home Wi-Fi signal.

Network setup started before DEEBOT was ready.

Turn ON Power Switch. Press the RESET Button. DEEBOT is 
ready for network setup when its Wi-Fi Indicator light flashes 
slowly.

DEEBOT does not support 5 GHz Wi-Fi.

Make sure the robot has been connected with 2.4 GHz Wi-Fi 
network.

9

DEEBOT does not clean the
whole area. 

The cleaning area is not tidy. 

Remove small objects from the floor and tidy up the cleaning 
area before DEEBOT starts cleaning.

10

DEEBOT Side Brushes drop out of 
place during use. 

The Side Brushes are  not correctly installed.

Make sure the Side Brushes click into place when installing.