Ecovacs Deebot T9 (DLX13-44) - Инструкция по эксплуатации - Страница 10

10

EN

ECOVACS HOME App

To enjoy all available features, it is recommended to control your DEEBOT via 

the ECOVACS HOME app.

Wi-Fi Indicator Light

Before you start, make sure that:

• Your mobile phone is connected to a Wi-Fi network.

• The 2.4GHz band wireless signal is enabled on your router.

• The Wi-Fi indicator light on DEEBOT is slowly flashing.

Slowly flashing

Disconnected to Wi-Fi or 

waiting for Wi-Fi connection

Rapidly flashing

Connecting to Wi-Fi

Solid

Connected to Wi-Fi

Wi-Fi Connection

Before Wi-Fi setup, make sure DEEBOT, mobile phone, and Wi-Fi network 

meet the following requirements.
DEEBOT and Mobile Phone Requirements

• DEEBOT is fully charged and the power switch of DEEBOT is turned on. 

• Wi-Fi status light slowly flashes.

• Turn off mobile phone’s cellular data (you can turn it back on after setup).

Wi-Fi Network Requirements

• You are using a 2.4GHz or 2.4/5 GHz mixed network.

• Your router supports 802.11b/g/n and IPv4 protocol. 

• Do not use a VPN (Virtual Private Network) or Proxy Server.

• Do not use a hidden network.

• WPA and WPA2 using TKIP, PSK, AES/CCMP encryption. 

• WEP EAP (Enterprise Authentication Protocol) is not supported.

• Use Wi-Fi channels 1-11 in North America and channels 1-13 outside North 

  America (refer to local regulatory agency).

• If you are using a network extender/repeater, the network name (SSID) and  

  password are the same as your primary network.

1

Operating DEEBOT

During the first cleaning:

1.Please make sure to install Air Freshener to create a home map in
  ECOVACS HOME App.
2.Please supervise DEEBOT and assist it should there be a problem.

Start

Install Air Freshener

Press 

Click