DREAME Bot Auto-Empty Robot Vacuum And Mop Z10 Pro Black (RLS5D) - Инструкция по эксплуатации - Страница 8

10

11

EN

EN

> 1.5 m

> 0.3 m

> 0.5 m

> 0.5 m

1. Remove the protective matter

3. Connect to a power outlet and start charging

2. Install the side brush

Click

Place the base within 

the best Wi-Fi range   

Put away the power cord 

into the cord storage slot

Preparation Before Use

Note:

• Keep the immediate area 1.5m in front of the base and 0.5m to its both sides 

  clear of objects.
• Make sure that no objects might block the signaling area.

Note: 

Install the side brush until it clicks into place.

Place the base on level ground against the wall and connect it to a power 

outlet. Place the robot onto the base to charge. The robot will turn on 

automatically and begin charging. It is recommended to fully charge your 

robot before first-time use.

About the Auto-Empty Base

It is recommended that the robot set out from the base before cleaning. This 

ensures that the robot returns to base smoothly.  Do not move the base while 

the robot is cleaning.
After the robot completes the cleaning task and automatically returns to the 

base, the base will start auto-empty. More settings can be operated on the APP. 

Open the Mi Home/Xiaomi Home app, and tap "  " in the upper right. 

Then tap "  " in the top right corner, scan the QR code, add "Dreame Bot 

Z10 Pro", and follow the prompts to finish the connection.

This product works with the Mi Home/Xiaomi Home app.* Use the Mi 

Home/Xiaomi Home app to control your device and interact with other 

smart devices.

Connecting with Mi Home/Xiaomi Home App

1. Download the Mi Home/Xiaomi Home App

Scan the QR code to download and install the app. You will be directed to the 

connection setup page if the app has been installed already. Alternatively, 

search “Mi Home/Xiaomi Home” in the app store to download and install it.

2. Add Device

Note:

• Only 2.4GHz Wi-Fi is supported.
• The version of the app might have been updated, please follow the instructions 

  based on the latest app version.

3. Reset Wi-Fi

Simultaneously press and hold the buttons   and 

 until you hear a voice 

say, “Waiting for the network configuration.” Once the Wi-Fi indicator is 

blinking slowly, the Wi-Fi has been successfully reset.

Note: 

If  your  robot  cannot  connect  to  the  app  successfully,  reset  the  Wi-Fi  and 

add the device again.

Wi-Fi Indicator

·Blinking slowly: 

To be connected

·Blinking quickly: 

Connecting

·On: 

Wi-Fi connected