Makita DTM52Z - Инструкция по эксплуатации - Страница 8

Реноваторы Makita DTM52Z - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 68
Загружаем инструкцию
background image

8 ENGLISH

Overload protection

When the tool/battery is operated in a manner that 

causes it to draw an abnormally high current, the tool 

stops automatically. In this situation, turn the tool off 

and stop the application that caused the tool to become 

overloaded. Then turn the tool on to restart.

Overheat protection

When the tool/battery is overheated, the tool stops 

automatically. In this situation, let the tool/battery cool 

before turning the tool on again.

Overdischarge protection

When the battery capacity is not enough, the tool stops 

automatically. In this case, remove the battery from the 

tool and charge the battery.

Protection lock function

When the protection system works repeatedly, the tool is locked.

In this situation, the tool does not start even if turning the tool 

off and on. To release the protection lock, remove the battery, 

set it to the battery charger and wait until the charging finishes.

Switch action

CAUTION:

 

Before installing the battery car-

tridge into the tool, always check to see that the 

tool is switched off.

► 

Fig.2:

    

1.

 Slide switch

To start the tool, slide the slide switch toward the “I 

(ON)” position.

To stop the tool, slide the slide switch toward the “O 

(OFF)” position.

Adjusting the orbital stroke rate

► 

Fig.3:

    

1.

 Dial

The orbital stroke rate is adjustable. To change the orbital 

stroke rate, turn the dial between 1 and 6. The higher the 

number is, the higher the orbital stroke rate is. Preset the 

dial to the number suitable for your workpiece.

NOTE:

 The dial cannot be turned directly from 1 to 6 

or from 6 to 1. Forcing the dial may damage the tool. 

When changing the dial direction, always turn the dial 

moving it through each intermediate number.

Lighting up the front lamp

CAUTION:

 

Do not look in the light or see the 

source of light directly.

Slide the slide switch toward the "I (ON)" position to 

light up the front lamp. The lamp keeps on lighting while 

the switch is the "I (ON)" position.

The front lamp goes out 10 seconds after sliding switch 

toward the "O (OFF)" position.

► 

Fig.4:

    

1.

 Front lamp

NOTE:

 When the overheat protection or the protec-

tion lock function is working, the front lamp blinks for 

about 1 minutes. Refer the section for the tool / bat

-

tery protection system.

Electronic function

The tool is equipped with the electronic functions for 

easy operation.

Constant speed control

The speed control function provides the constant orbital 

stroke rate regardless of load conditions.

Soft start feature

Soft start feature reduces starting reaction.

Accidental re-start preventive 

function

When installing the battery cartridge while the slide 

switch in the "I (ON)" position, the tool does not start.

To start the tool, first slide the slide switch toward the 

"O (OFF)" position and then slide it toward the "I (ON)" 

position.

ASSEMBLY

Installing or removing battery 

cartridge

CAUTION:

 

Always switch off the tool before 

installing or removing of the battery cartridge.

CAUTION:

 

Hold the tool and the battery car-

tridge firmly when installing or removing battery 

cartridge.

 Failure to hold the tool and the battery 

cartridge firmly may cause them to slip off your hands 

and result in damage to the tool and battery cartridge 

and a personal injury.

► 

Fig.5:

    

1.

 Red indicator 

2.

 Button 

3.

 Battery cartridge

To remove the battery cartridge, slide it from the tool 

while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the 

battery cartridge with the groove in the housing and slip 

it into place. Insert it all the way until it locks in place 

with a little click. If you can see the red indicator as 

shown in the figure, it is not locked completely.

CAUTION:

 

Always install the battery cartridge 

fully until the red indicator cannot be seen.

 If not, 

it may accidentally fall out of the tool, causing injury to 

you or someone around you.

CAUTION:

 

Do not install the battery cartridge 

forcibly.

 If the cartridge does not slide in easily, it is 

not being inserted correctly.

CAUTION:

 

Always be sure that the tool is 

switched off and the battery cartridge is removed 

before carrying out any work on the tool.

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Makita DTM52Z?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"