Реноваторы Makita DTM52Z - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DTM52
Oscillation per minute
10,000 - 20,000 min
-1
Oscillation angle, left/right
1.8° (3.6° total)
Overall length
with BL1820B
305 mm
with BL1860B
322 mm
Net weight
1.7 - 2.0 kg
Rated voltage
D.C. 18 V
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Applicable application tool
Use the application tool which type is adaptable to this
tool as shown in the following table.
OIS
STARLOCK PLUS
STARLOCK
STARLOCK MAX
Intended use
The tool is intended for sawing and cutting wood,
plastic, gypsum, non-ferrous metals, and fastening
elements (e.g. nails and staples). It is also intended for
working soft wall tiles, as well as dry sanding and scrap
-
ing of small surfaces. It is especially for working close to
edge and flush cutting.
Noise
The typical A-weighted noise level determined accord
-
ing to EN62841-2-4:
Work mode: Sanding
Sound pressure level (L
pA
) : 69 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
The typical A-weighted noise level determined accord
-
ing to EN62841-1:
Work mode: Cutting with plunge cut saw blade
Sound pressure level (L
pA
) : 72 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
The typical A-weighted noise level determined accord
-
ing to EN62841-1:
Work mode: Cutting with segmental saw blade
Sound pressure level (L
pA
) : 76 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
The typical A-weighted noise level determined accord
-
ing to EN62841-1:
Work mode: Scraping
Sound pressure level (L
pA
) : 71 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Содержание
- 60 ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ; Подходящий блок аккумулятора и зарядное устройство; Назначение
- 61 МЕРЫ БЕЗОПАСНОСТИ; Сохраните брошюру с инструк
- 62 СОХРАНИТЕ ДАННЫЕ; Важные правила техники
- 64 ОПИСАНИЕ РАБОТЫ; Функция предупреждения перегрузки
- 65 Постоянный контроль скорости; СБОРКА
- 66 Использование шлифовального; ЭКСПЛУАТАЦИЯ; Резка, распиливание и зачистка
- 67 Пылезащитное приспособление; Установка пылезащитного; ОБСЛУЖИВАНИЕ
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)