Makita DTM52Z - Инструкция по эксплуатации - Страница 5

Реноваторы Makita DTM52Z - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 68
Загружаем инструкцию
background image

5 ENGLISH

NOTE:

 

The declared noise emission value(s) has been 

measured in accordance with a standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared noise emission value(s) may 

also be used in a preliminary assessment of exposure.

WARNING:

 

Wear ear protection.

WARNING:

 

The noise emission during actual 

use of the power tool can differ from the declared 

value(s) depending on the ways in which the 

tool is used especially what kind of workpiece is 

processed.

WARNING:

 

Be sure to identify safety mea-

sures to protect the operator that are based on an 

estimation of exposure in the actual conditions of 

use (taking account of all parts of the operating 

cycle such as the times when the tool is switched 

off and when it is running idle in addition to the 

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter

-

mined according to EN62841-2-4:
Work mode: Sanding

Vibration emission (a

h

) : 2.5 m/s

2

 or less

Uncertainty (K) : 1.5 m/s

2

The vibration total value (tri-axial vector sum) deter

-

mined according to EN62841-1:
Work mode: Cutting with plunge cut saw blade

Vibration emission (a

h

) : 2.5 m/s

2

 or less

Uncertainty (K) : 1.5 m/s

2

The vibration total value (tri-axial vector sum) deter

-

mined according to EN62841-1:
Work mode: Cutting with segmental saw blade

Vibration emission (a

h

) : 2.5 m/s

2

 or less

Uncertainty (K) : 1.5 m/s

2

The vibration total value (tri-axial vector sum) deter

-

mined according to EN62841-1:
Work mode: Scraping

Vibration emission (a

h

) : 2.5 m/s

2

 or less

Uncertainty (K) : 1.5 m/s

2

NOTE:

 The declared vibration total value(s) has been 

measured in accordance with a standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared vibration total value(s) may also 

be used in a preliminary assessment of exposure.

WARNING:

 

The vibration emission during 

actual use of the power tool can differ from the 

declared value(s) depending on the ways in which 

the tool is used especially what kind of workpiece 

is processed.

WARNING:

 

Be sure to identify safety mea-

sures to protect the operator that are based on an 

estimation of exposure in the actual conditions of 

use (taking account of all parts of the operating 

cycle such as the times when the tool is switched 

off and when it is running idle in addition to the 

trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A 

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

 

Read all safety warnings, instruc-

tions, illustrations and specifications provided 

with this power tool.

 Failure to follow all instructions 

listed below may result in electric shock, fire and/or 

serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

Cordless multi tool safety warnings

1. 

This power tool is intended to function for 

sawing, cutting, scraping and sanding. Read 

all safety warnings, instructions, illustrations 

and specifications provided with this power 

tool.

 Failure to follow all instructions listed below 

may result in electric shock, fire and/or serious 

injury.

2. 

Hold power tool by insulated gripping sur-

faces, when performing an operation where 

the cutting accessory may contact hidden wir-

ing.

 Cutting accessory contacting a “live” wire may 

make exposed metal parts of the power tool “live” 

and could give the operator an electric shock.

3. 

Use clamps or another practical way to secure 

and support the workpiece to a stable plat-

form.

 Holding the work by hand or against your 

body leaves it unstable and may lead to loss of 

control.

4. 

Always use safety glasses or goggles. 

Ordinary eye or sun glasses are NOT safety 

glasses.

5. 

Hold the tool firmly.

6. 

Make sure the application tool is not contact-

ing the workpiece before the switch is turned 

on.

7. 

Keep hands away from moving parts.

8. 

Do not leave the tool running. Operate the tool 

only when hand-held.

9. 

Always switch off and wait for the blade to 

come to a complete stop before removing the 

blade from the workpiece.

10. 

Do not touch the application tool or the work-

piece immediately after operation; they may be 

extremely hot and could burn your skin.

11. 

Do not operate the tool at no-load 

unnecessarily.

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Makita DTM52Z?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"