Ardesto CVC-X0621WB - Инструкция по эксплуатации - Страница 20

EN

20

Charging base: install the charger and charger stand

Insert the charger into charger stand (see Fig. 4), after it, use the 
screws attached to fix the whole unit onto the wall or put in on a 
horizontal surface.

s 

3.3 Charging base: install the charger and charger stand

Insert the charger into charger stand (see Fig. 3.4 and Fig.3a 4b), after it, use the 
screws attached to fix the whole unit onto the wall or put in on a horizontal surface. 
 

4. OPERATION INSTRUCTION 

  4.1 Operate the whole unit 

There are two switches including power switch (1) and power regulation button (2) 

(see Fig.4-1). Press down power switch (1), the motor starts to run, the floor brush 
indicator turns on and the appliance enters into working condition; Press down the 
power regulation button  (2), the cleaner will change to the Turbo Mode in which it 
achieves a much better cleaning performance on a hard-to-clean surface.  Once the 
power regulation button  is press again,  the cleaner will change back to the Normal 
Mode in which the cleaner will have a longer running time. Press the power switch (1) if 
you want to make the appliance stop working. During operation, please pay attention to 
charge quantity indicators  (3), the indicators will extinguish gradually as the charge 
quantity  reduces and the appliance will stop working automatically when all the 
indicators extinguish. 

Fig.3-4 

Fig. 3-4a 

Fig. 3-4b 

Fig. 4