Canon 200 - Инструкция по эксплуатации - Страница 122

Loading Paper in the Top Feed

You can load multiple sheets of paper of the same type and size in the top feed.

Important

• If you cut plain paper to a size of 5" x 7" (13 x 18 cm) or smaller to perform a trial print, it may cause a

paper jam.

Note

• We recommend Canon genuine photo paper for printing photos. For details on the Canon genuine

paper, see 

Supported Media Types

.

• You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour

Paper SAT213.

For the page size and paper weight you can use for this printer, see 

Supported Media Types

.

• Print in an environment (temperature and humidity) suitable to the paper in use. For the temperature

and humidity conditions of Canon genuine papers, refer to the paper's packaging or the supplied
instructions.

1.

Prepare paper.

Align the edges of paper. If paper is curled, flatten it.

Note

• Align the edges of paper neatly before loading. Loading paper without aligning the edges may

cause paper jams.

• If paper is curled, hold the curled corners and gently bend them in the opposite direction until the

paper becomes completely flat.

For details on how to flatten curled paper, see 

Check3

 in 

Paper Is Smudged / Printed Surface Is

Scratched

.

• When using Photo Paper Plus Semi-gloss SG-201, even if the sheet is curled, load one sheet at a

time as it is. If you roll up this paper to flatten, this may cause cracks on the surface of the paper
and reduce the print quality.

2.

Open the paper support (A) of the top feed.

3.

Open the paper output tray (B) gently.

122