Kuppersberg GSA 489 - Инструкция по эксплуатации - Страница 7

7

english

Technical passporT

Dishwasher

Â

 Open the taps completely after 

making the connections to check for 

water leaks.

For your safety, close the water 

inlet tap completely after the washing 

programme is over.

Connection to the drain

Water discharge hose can directly 

be connected to the drain hole or sink’s 

drainage. The length of this connection 

must be min. 50 cm and max. 100 cm 

from the fl oor.

A discharge hose longer than 4 

meters causes dirty washing.

Attach the water discharge hose 

to the drainpipe without bending it. 

Tightly  fi x  the  water  discharge  hose  to 

the drainpipe in order to prevent any 

dislocation of the water discharge hose 

during operation of the product.

Drainpipe must be connected to the 

sewage system and it should not be 

connected to any surface water.

Adjusting the feet

If the door of the product cannot be 

closed properly or if the product swings 

when you push it slightly, then you need 

to adjust the feet of the product. Adjust 

the feet of the product as illustrated in 

the installation manual supplied with 

the product. 

Aquasafe+ 

(depends on the model)

Protect the Aquasafe+ system 

against water leaks that may occur at 

hose inlet. Water contact with the valve 

box of the system must be prevented. 

Otherwise, electrical assembly will get 

damaged. If the Aquasafe system is 

damaged, unplug the product and call 

the Authorised Service Agent.

As the hose set contains electrical 

connections and assemblies, never 

shorten or lengthen the hose with 

extension hoses.