Kuppersberg GSA 489 - Инструкция по эксплуатации - Страница 4

4

Technical passporT

english

Dishwasher

Technical specifi cations

This product complies with the 

following EU directives:

Development, production and sales 

stages of this product comply with the 

safety rules included in all pertaining 

European Community regulations.

2006/95/EC, 2004/108/EC, 93/68/

EEC, IEC 60436, EN 50242

Power input

220-240 V, 50 Hz

Total power 

consumption

1900-2200 W

Heater power 

consumption

1800 W

Total current

(depends on the 

model)

10 A (see type plate)

Drain pump power 

consumption

30 W

Water pressure

0.3 –10 bar (= 3 – 100 N/

cm² = 0.01-1.0 Mpa)

Technical  specifi cations  may  be 

changed without prior notice to improve 

the quality of the product.

Figures in this manual are schematic 

and may not match the product exactly.

Values stated on the product labels 

or in the documentation accompanying 

it are obtained in laboratory conditions 

in accordance with the relevant 

standards. Depending on operational 

and environmental conditions of the 

product, these values may vary.

Note for test institutions:

Data required for performance tests 

shall be provided upon request. Requests 

can be e-mailed to the following address:

dishwasher@standardloading.com

Do not forget to provide the code, 

stock and serial numbers of the product 

to be tested in your request e-mail along 

with your contact information. Code, 

stock and serial numbers of the product 

is located on the type label attached to 

the side of the door.

2  I M P O RTA N T  S A F E TY 

I N S T R U CT I O N S

This section contains safety 

instructions that will help to get 

protected from risk of personal injury or 

property damage Failure to follow these 

instructions shall void all warranties.

General safety

Â

 Never place the product on a 

carpet-covered  fl oor;  otherwise,  lack  of 

airfl ow  beneath  the  product  will  cause 

electrical parts to overheat. This will 

cause problems with your product.

Â

 Do not operate the product if the 

power cable / plug is damaged! Call the 

Authorised Service Agent.

Â

 Connect the product to a grounded 

outlet protected by a fuse complying 

with the values in the “Technical 

specifi cations”  table.  Do  not  neglect 

to have the grounding installation 

made  by  a  qualifi ed  electrician. 

Manufacturer shall not be liable for 

any damages that will arise  when the 

product is used without grounding in 

accordance with the local regulations.

Â

 The water supply and draining 

hoses must be securely fastened and 

remain undamaged.

Â

 Unplug the product when not in 

use.

Â

 Never wash the product by 

spreading or pouring water onto it! 

There is the risk of electric shock!