Kuppersberg GSA 489 - Инструкция по эксплуатации - Страница 22

22

Technical passporT

english

Dishwasher

after you turn on the machine by 
pressing the On / Off key.

Canceling a programme

To cancel the program selection 

while the machine is operating open 
the door.

! Care must be taken when opening 

the door, as steam will escape.

Press and hold Start / Pause / Cancel 

key for 3 seconds. Release the key as the 
Start / Pause / Cancel indicator starts 

fl ashing.  Once  you  close  the  door  of 

your machine, draining is completed 
in 2 minutes and the machine gives an 
audible warning when it is completed.

 There might be residues of 

detergent or rinse aid left in the 
machine and / or on the pieces being 
washed depending on the step the 
programme you have cancelled was in. 

Changing a Programme

To change the program selection 

while the machine is operating open 
the door.

! Care must be taken when opening 

the door, as steam will escape.

To change your selection after the 

programme has started:
1.  Press Start / Pause / Cancel key 

to switch your machine in pause 
mode.

2.  Select the desired programme by 

pressing the Programme Selection 
key.

3.  Start the new programme by 

pressing Start / Pause / Cancel key 
again.

  The new programme will start 

from the step where the previous 
one has stopped. For example, if the 
previous programme has remained in 
drying step, new one will start from the 
drying step as well.

  If you want to run the new 

programme from the very beginning, 

fi rst  you  must  cancel  the  current 

programme and then select a new 
programme.

Starting your machine

Â

 Open the tap.

Â

 Plug in to the socket.

Â

 Open the door of the dishwasher.

Â

 Place the dishes in accordance 

with the instructions in the user manual.

Â

 Make sure that the upper and 

lower impellers rotate freely.

Â

  Put  suffi cient  amount  of 

detergent in the detergent dispenser 
and close its lid.

Â

 Make sure that indicators on 

programme display are illuminated by 
pressing On / Off key.

Â

 Check if the Salt and Rinse Aid 

indicators light and add salt and / or 
rinse aid if needed.

 Since different salt brands in 

the market have different particle sizes 
and since the water hardness