Kuppersberg GSA 489 - Инструкция по эксплуатации - Страница 14

14

Technical passporT

english

Dishwasher

3.  Close the detergent dispenser lid 

by pressing on it lightly. A «click» 

will be heard when the lid is 

closed.

In programmes with prewash and 

at high temperature, in which you use 

tablet detergents, make sure that the 

detergent dispenser lid is closed fi rmly.

Use powder detergent in short 

programmes without prewash since 

the solubility of the tablet detergent 

changes depending on the temperature 

and time.

Excessive usage of powder 

detergents will cause the detergent not 

dissolve completely and will also cause 

scratches on the glassware.

Tablet detergents

Table detergents exhibit water 

softening and / or rinse aid effect in 

addition to detergent effect. Some types 

of these detergents also contain special-

purpose washing chemicals such as 

glass and stainless steel protectors.

Tablet detergents give satisfying 

results only under certain usage 
conditions. The best washing 

performance in dishwashers is obtained 

by using detergent, rinse aid and water 

softening salt individually.

Information about suitable places 

(detergent dispenser, basket etc.) in the 

dishwasher to place the tablet can be 

found amongst the usage instructions 

on the packages of the tablet detergents.

Tablet detergent types commonly 

found in the market:

2 in 1: 

Contains detergent, 

rinse aid or water softening salt

3 in 1:

Contains detergent, 

rinse aid and water softening salt

4 in 1:

 Contains  glass 

protectors in addition to detergent, 

rinse aid and water softening salt

5 in 1: 

Contains glass and 

stainless steel protectors in addition to 

detergent, rinse aid and water softening 

salt

Observe the instructions of the 

detergent manufacturer on the package 

when using tablet detergents.

When you switch to powder 

detergent from tablet 

detergent:

1.  Make sure that salt and rinse aid 

reservoirs are full.

2.  Set the water hardness to the 

highest level and perform an 

empty run.

3.  After the empty washing cycle, 

review the user manual and 

readjust the water hardness level 

so as to suit the water supply.

4.  Make the appropriate rinse aid 

settings.