Kuppersberg GSA 489 - Инструкция по эксплуатации - Страница 31

31

english

Technical passporT

Dishwasher

we recommend you to use tablet 

detergents.

Â

 Impeller holes are clogged. >>> 

Lower and upper impeller holes might 
be clogged with food remnants such 
as lemon pips. Clean the impellers 
regularly as illustrated in section 
«Cleaning and Care».

Decorations and ornaments 

on kitchen utensils are being 

erased.

C

 Decorated glasses and decorated 

luster porcelains are not suitable 

for washing in the dishwasher. 

Manufacturers of glassware and 

porcelain tableware items do not 

recommend washing such kitchen 

utensils in the dishwashers either.

Dishes are scratched.

Kitchen utensils that contains or 

are made of aluminum should not be 

washed in dishwasher.

Â

 Salt leakage exists. >>> Pay 

attention not to spill salt around the 

salt  filling  hole  while  adding  salt. 

Spilled salt can cause scratches. Make 

sure that the salt reservoir lid is tightly 

closed after finishing the filling process. 

Run the prewash programme to remove 

the salt that spilled inside the machine. 

Since the salt granules that will remain 

under the lid will dissolve during 

prewash, causing the lid loosen, check 

the lid once again at the end of the 

programme.

Â

 Water hardness setting is low 

or salt level is insufficient >>> Measure 

the hardness of the supply water 

appropriately and check the water 
hardness setting.

Â

 Dishes are not placed orderly 

in the machine. >>> When placing the 
glasses and other glassware into the 
basket lean them not against other 
dishes but the edges or racks of the 
basket or the glass support wire. 
Striking of the glasses to each other 
or to other dishes due to the impact of 
water during washing can cause breaks, 
or scratches on their surfaces.

A smear remains on glasses that 

resembles milk stain which can 

not be removed when wiped 

by hand. A bluish / rainbow 

appearance occurs when the 

glass is pointed to light.

Â

 Excessive rinse aid is used. 

>>>Lower rinse aid setting. Clean the 
spilled rinse aid when adding rinse aid.

Â

 Corrosion has occurred on 

glass due to soft water. >>> Measure 
the hardness of the supply water 
appropriately and check the water 
hardness setting. If your supply water 
is soft (<5 dH), do not use salt. Choose 
programmes that wash in higher 
temperatures (e.g. 60-65°C). You can 
also use glass protective detergents 
that are commercially available.

Foam forms in the machine.

Â

 Dishes are washed with hand-

wash detergent by hand but not 
rinsed before placing them into the 
machine. >>> Hand-wash detergents