Smeg C95GMCA9-1 - Инструкция по эксплуатации - Страница 6

Instructions

64

Installation and maintenance

• THIS  APPLIANCE 

MUST NOT 

BE INSTALLED

 IN A BOAT OR 

CARAVAN.

• The appliance must not be 

installed on a pedestal.

• Position the appliance into the 

cabinet cut-out with the help of 
a second person.

• To prevent any possible 

overheating, the appliance should 
not be installed behind a 
decoration door or a panel.

• Have the gas connection 

performed by authorised staff.

• Installation using a hose must be 

carried out so that the length of the 
hose does not exceed 2 metres 
when fully extended for steel 
hoses.

• The hoses should not come into 

contact with moving parts and 
should not be crushed in any way.

• If required, use a pressure 

regulator that complies with 
current regulations.

• After carrying out any operation, 

check that the tightening torque 
of gas connections is between 
10 Nm and 15 Nm.

• At the end of the installation, check 

for any leaks with a soapy 
solution, never with a flame.

• Have the electrical connection 

performed by authorised technical 
personnel.

• The appliance must be connected 

to ground in compliance with 
electrical system safety standards.

• Use PVC cables withstanding a 

temperature of at least 90 °C.

• The tightening torque of the screws 

of the terminal board leads must 
be 1.5 - 2 Nm.

• Before installation, make sure that 

the local distribution conditions 
(nature and pressure of the gas) 
and the adjustment of the 
appliance are compatible.

• The adjustment conditions for this 

appliance are shown on the gas 
setting label.