Smeg C95GMCA9-1 - Инструкция по эксплуатации - Страница 17

Use

75

EN

3.1 Using the accessories

Ring reducers

The ring reducers must be placed on the 
hob grids. Make sure they are placed 
properly.

Racks and trays

Racks and trays have to be inserted into the 
side guides until they come to a complete 
stop.

The mechanical safety locks that prevent the 
rack from being taken out accidentally have 
to face downwards and towards the oven 
back.

3.2 Using the hob

All the appliance’s control and monitoring 
devices are located together on the front 
panel. The burner controlled by each knob 
is shown next to the knob. The appliance is 
equipped with an electronic ignition device. 
Simply press the knob and turn it anti-
clockwise to the maximum flame symbol, 
until the burner ignites. If the burner does not 
light in the first 15 seconds, turn the knob to 

 and wait 60 seconds before trying 

again. After lighting, keep the knob pressed 
in for a few seconds to allow the 
thermocouple to heat up. The burner may 
go out when the knob is released: In this 
case, the thermocouple has not heated up 
sufficiently. 
Wait a few moments and repeat the 
operation. Keep the knob pressed in 
longer.

Gently insert racks and trays into 
the oven until they come to a stop.

Clean the trays before using them 
for the first time to remove any 
residues left by the manufacturing 
process.

In case of an accidental switching 
off, a safety device will be tripped, 
cutting off the gas supply, even if 
the gas cock is open. Return the 
knob to 

 and wait at least 

60 seconds before lighting it 
again.