Electrolux EKM 60350 X - Инструкция по эксплуатации - Страница 32

32

 electrolux

Installation

This appliance cannot be po-
sitioned on a base.

The following instructions are meant

for a qualified installer, in order that the
operations of installation, regulation, and
service are executed according to the
existing regulations.

Whenever changes are mode involving

the disconnection of the appliance it is nec-
essary to proceed with maximum caution.

THE MANUFACTURING COM-
P A N Y   D E C L I N E S   A N Y
RESPONSABILITY FOR POS-
SIBLE DAMAGES RESULTING
F R O M   A N   I N S T A L L A T I O N
WHICH DOES NOT COMPLY
WITH THE RULES IN FORCE.

Positioning

This appliance has been designed to

be placed close to furniture units not ex-
ceeding the height of the working level.

The distance between the hob and

the side wall/furniture (if present) should
be minimum 450 mm.

Feet Assembly

B e f o re   i n s t a l l i n g   t h e   c o o k e r,   i t   i s
necessary to assemble the supplied feet.

1.

Remove the hob pan supports, the
burner caps  and crowns and the
oven accessories.

2.

Carefully lean the cooker on its back,
paying attention not to cause any
damage.

3.

Adjust the feet height by unscrewing
the  bottom part of each foot, until
you obtain the required height (height
can be adjusted from 850 to 880
mm).

4.

Insert the feet into the relevant holes

indicated in the diagram.

5.

Lift the cooker in vertical position.
Replace the crowns, the burner caps,
the hob pan supports and the oven
accessories.

6.

I f   n e c e s s a r y,   a d j u s t   t h e   c o o k e r
horizontal levelling by turning the
bottom part of the feet, until the
appliance is completely stable. 

 (see

diagram).