STATUS CP190C - Инструкция по эксплуатации - Страница 8

8

TOOL PARTS OVERVIEW

TOOL PARTS OVERVIEW

1.  Blade

2.  Riving knife

3.  Outer blade flange

3a. Inner blade flange (not shown)

4.  Blade bolt

5.  Base plate

6.  Upper immobile blade guard

7.  Dust extraction port

8.  Back handle

9.  ON/OFF switch

10.  Motor 

11.  Front handle

CIRCULAR SAW SAFETY RULES

• 

Never apply side pressure to stop the blade rotation after switching off the saw.

• 

Do not touch the saw blade immediately after operation. It may be extremely hot 

and could burn your skin.

• 

Do not use blades with parameters not corresponding to those mentioned above.

• 

Do not use abrasive wheels (for grinding or cutting).

• 

Do not use dull or damaged blades. 

Unsharpened or improperly set blades produce 

narrow kerf causing excessive friction, blade binding and kickback.

• 

Do not reach underneath the work piece. 

The guard cannot protect you from the blade 

below the work piece.

• 

Adjust the cutting depth to the thickness of the work piece. Less than a full tooth of 

the blade teeth should be visible below the work piece.

• 

Never hold piece being cut in your hands or across your leg. Secure the work piece 

to a stable platform. 

It is important to support the work properly to minimize body 

exposure, blade binding, or loss of control.

• 

Never use damaged or incorrect blade flanges or bolt. 

The blade flanges and bolt were 

specially designed for your saw, for optimum performance and safety of operation.

• 

Rags, cloths, cord, string and the like should never be left around the work area.

• 

The tool must be used only for its prescribed purpose. 

Any use other than those 

mentioned in this Manual will be considered a case of misuse. The user and not the 

manufacturer shall be liable for any damage or injury resulting from such cases of misuse.

• 

To use this tool properly, you must observe the safety regulations, the assembly 

instructions and the operating instructions found in this Manual. All persons who 

use and service the machine have to be acquainted with this Manual and must be 

informed about its potential hazards. Children and frail people must not use this 

tool. Children should be supervised at all times if they are in the area in which the 

tool is being used. It is also imperative that you observe the accident prevention 

regulations in force in your area. The same applies for general rules of occupational 

health and safety.

• 

The manufacturer shall not be liable for any changes made to the tool nor for any 

damage resulting from such changes.

• 

Power tools must not be used outdoors in rainy weather, or in moist environment 

(after rain) or in close vicinity with easily flammable liquids and gases. The working 

place should be well lit.

EN