STATUS CP190C - Инструкция по эксплуатации - Страница 4

4

GENERAL SAFETY RULES

EN

• 

Avoid accidental starting. Ensure the switch is in the off position before plugging in. 

Carrying power tools with your finger on the switch or plugging in power tools that have 

the switch on invites accidents.

• 

Remove any adjusting key or wrench before turning the power tool on. 

A wrench or a 

key left attached to a rotating part of the power tool may result in personal injury.

• 

Do not overreach. Keep proper footing and balance at all times. 

This enables better 

control of the power tool in unexpected situations.

• 

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and 

gloves away from moving parts.

Loose clothes, jewellery or long hair can be caught in 

moving parts.

• 

If devices are provided for the connection of dust extraction and collection facilities, 

ensure these are connected and properly used.

Use of these devices can reduce dust 

related hazards.

POWER TOOL USE AND CARE

• 

Do not force the power tool. Use the correct power tool for your application. 

The 

correct power tool will do the job better and safer at the rate for which it was designed.

• 

Do not use the power tool if the switch does not turn it on and off.

 Any power tool 

that cannot be controlled with the switch is dangerous and must be repaired.

• 

Disconnect the plug from the power source before making any adjustments, 

changing accessories, or storing power tools. 

Such preventive safety measures reduce 

the risk of starting the power tool accidentally.

• 

Store idle power tools out of the reach of children and do not allow persons 

unfamiliar with the power tool or these instructions to operate the power tool. 

Power tools are dangerous in the hands of untrained users.

• 

Maintain power tools. Check for misalignment or binding of moving parts, breakage 

of parts and any other condition that may affect the power tools operation. If 

damaged, have the power tool repaired before use. 

Many accidents are caused by 

poorly maintained power tools. 

• 

Keep cutting tools sharp and clean.

 Properly  maintained  cutting  tools  with sharp  

cutting  edges  are  less  likely  to  bind and are easier to control.

• 

Use  the  power  tool,  accessories  and tool  bits  etc.  in  accordance  with  these 

instructions,  taking  into  account  the working  conditions  and  the  work  to  be 

performed. 

 Use  of  the  power  tool  for  op-erations different from those intended could 

result in a hazardous situation.

SERVICE

• 

Have your power tool serviced by a qualified repair person using only identical 

replacement parts.

This will ensure that the safety of the power tool is maintained.